Table of Contents
How do I connect to Linksys WAP54G?
Connect to a Router
- Connect the Linksys WAP54G device to your Internet modem using the Ethernet cable.
- Type “admin” — without quotation marks — in the password field. Leave the user name blank. Click “OK” to access the WAP54G setup page.
Does an access point need to be connected directly to the router?
A Wireless Access Point (WAP) allows several devices to connect via WiFi to a single network. The wired equivalent is a switch. But unlike a switch, a WAP does not need to be wired to the router. Access Points connect via wired Ethernet to a switch, or a switch port on a router, then serve up WiFi.
How do I use a wireless access point?
Simply connect the access point to one of the ports of your existing wired/wireless router then configure the access point’s wireless settings.
- Open the access point’s web-based setup page by entering the default IP Address “192.168.
- On the web-based setup page, click on Wireless.
- Enter the Network Name (SSID).
Does the Linksys WRT54G work with wap54g?
This feature only works with the Linksys Wireless-G Router (model number: WRT54G) or another Wireless-G Access Point (model number: WAP54G). To configure a Wireless Repeater environment, select Wireless Repeater and enter the MAC address of the remote access point in theRemote Access Point’s LAN MAC Address field.
What is a wap54g bridge?
Wireless-G Access Point Wireless Bridge. This mode connects two physically separated wired networks using two access points (use additional access points to connect more wired networks). This feature only works with another Wireless-G Access Point (model number: WAP54G).
Which Linksys access point do I need for the AP client mode?
NOTE:For the AP Client and Wireless Bridge modes, the remote access point must be a second Linksys Wireless-G Access Point (model number: WAP54G). For the Wireless Repeater mode, the remote wireless bridge must be a second Linksys Wireless-G Access Point (model number: WAP54G) or Wireless-G Router (model number: WRT54G).
Where is the Linksys wireless guard service available?
Figure 5-1: Welcome Screen NOTE: The Linksys Wireless Guard service is available only in the USA and Canada. Chapter 5: Setting up the Wireless-G Access Point10 Using the Setup Wizard