Table of Contents
How do you clean a model locomotive?
Museums generally use an extremely mild (1 percent) solution of soap and water to clean artifacts. The same will work on models. Apply a mild soap wash with a cloth or towel that is slightly damp. Work slowly and cautiously until you find the pressure and moisture necessary to remove the dirt and only the dirt.
What kind of oil do model trains use?
In closing, don’t use 3-in-1, WD40 or cooking oils. Instead, use a dedicated model train lubricant such as Gaugemaster’s lubrication fluid or Labelle oil and greases and your engines and rolling stock will run smoother, longer and more reliably. Get my recommended Labelle oil.
Can you grease an electric motor while running?
Care must be taken to follow the simple rule of 1-2 seconds between grease gun strokes and to grease while the motor is running. NEVER use an electric grease gun to grease an electric motor. A disadvantage of shielded bearings is an increase in friction and temperature of the bearing.
How do you get rust off model train tracks?
Vinegar. One of the most popular substances used on train tracks for decades, white vinegar is versatile, safe, and can remove any harmful chemicals found on your tracks. Apply vinegar to a cloth and wipe down until the rust or grime has gone.
Are there any parts available for old Ho and N scale locomotives?
It should be noted that many older HO and N scale locomotive models are obsolete and parts are no longer available. If your train cannot be fixed, there is no charge. The Model Railroad Shop offers installation services for Digital Command Control decoders in HO, N and O scale locomotives and accessories.
What should I do if my locomotive is not working properly?
If you are just starting out, your best option is to return the locomotive or find a local service location. If you don’t get a good light or a second locomotive won’t work, then the problem is probably on the track or the wires. Check the Track and Wires. If you have detected a short circuit in the track, check your wires again.
When will my locomotive be performance tested?
Every new locomotive and every new power supply will be performance tested at the time of sale or before it is shipped to the customer to assure that it runs according to the specifications provided by the manufacturer.
Why is my locomotive light not working?
If you don’t get a good light or a second locomotive won’t work, then the problem is probably on the track or the wires. Check the Track and Wires. If you have detected a short circuit in the track, check your wires again. A short circuit can occur any time one rail or wire touches the opposite rail or wire.