Table of Contents
How much does a D10 dozer blade weight?
The Cat D10 could be ordered with up to a 19-foot (5.8 m) U-blade, and weighed in at 180,000 lb (82,000 kg). Later versions weighed in at 190,000 lb (86,000 kg). The U-blade was 7 feet (2.1 m) high and could push 35 cu yd (27 m3) according to Caterpillar’s literature.
How much does a D 10 Caterpillar dozer weigh?
171674 lbs
Operating Specifications
| Fuel Capacity | 382 gal (1,446 l) |
|---|---|
| Operating Weight | 171674 lbs (77,871 kg) |
How many HP is a D10 dozer?
600-horsepower
The D10 Caterpillar dozer pairs a 600-horsepower C27 diesel engine with a stator clutch torque divider. Operating weight is 154,700 pounds, oil change intervals have been extended, and fuel lines have been integrated to enhance reliability.
How much is a D10 dozer worth?
CAT D10 Price: Used prices start at around $350,000 for older models, ranging up to $900,000 and more for more recent models with all the bells and whistles.
How much does a d11 blade weight?
230,935 lb
The D11R now weighed 230,935 lb (104,750 kg). The Carrydozer version has a special blade with a curvature that allowed 57 cy ( 43.6 m³) to be pushed.
How big is a D10 bulldozer?
The new D10 weighed over 190,000 lbs. and measured 15 ft. tall, 12 ft. wide and slightly more than 31 ft.
How much horsepower does a D11 dozer have?
Caterpillar D11 Dozer The D11 is powered by a3508 V-8 diesel engine, with a 770 horsepower.
Is a D10 The biggest dozer?
As of now, Caterpillar offers three large dozers, of which the D11 is the largest. (There is not yet a D12 model.) The other two large CAT dozers are the 600 hp D10T2 and the 452 hp D9. The D10 is a 77-ton machine featuring a strengthened frame.
Why are bulldozers faster in reverse?
Why does a bulldozer move faster when it goes backwards? A bulldozer’s main job is to push soil. When it moves forward pushing soil, it has to move slower making sure it is giving a solid push. It moves faster when it moves backwards, so it can go back to the pushing position quickly to increase efficiency.
Why does a D10 have a 0?
One is simply cosmetic. With nine single-digit faces and only a single two-digit face, using 0 instead of 10 allows them to print all the faces at a similar large font size. The other is, as others have noted, to make the die work better for rolling “percentiles.” In this case, you roll two ten sided dice.
How much does a d10t2 Dozer weigh?
D10T2 Dozer Engine Weights Engine Model Cat C27 ACERT ™ Operating Weight 70 171 kg 154,700 lb Emissions U.S. EPA Tier 4 Final Shipping Weight 49 793 kg 109,775 lb or Tier 2 and EU Stage II Equivalent Net SAE J1349/ISO 9249 (FWD/REV) 447/538 kW 600/722 hp 2 Helping you get more done at the lowest cost per unit of material
What are the specs of a caterpillar d 10 R bulldozer?
Lectura specs Construction machinery Bulldozers Bulldozers Caterpillar Caterpillar D 10 R specifications Caterpillar D 10 R Specifications & Technical Data (1996-2004) Rate this machine now! Weight: 64.3t – Transport length: 9.39m – Transport width: 4.862m – Transport height: 4.26m – Blade type: U – Track width: 711mm
How much does a dozer engine weigh?
D10T2 Dozer Engine Weights Engine Model Cat C27 ACERT ™ Operating Weight 70 171 kg 154,700 lb Emissions U.S. EPA Tier 4 Final Shipping Weight 49 793 kg 109,775 lb or Tier 2 and EU Stage II Equivalent Net SAE J1349/ISO 9249 (FWD/REV) 447/538 kW 600/722 hp 2
What are the specs of a caterpillar D10T excavator?
Lectura specs Construction machinery Bulldozers Bulldozers Caterpillar Caterpillar D10T specifications Caterpillar D10T Specifications & Technical Data (2004-2017) 7,50 /10 Rate this machine now! Weight: 64.1t – Transport length: 9.26m – Transport width: 3.7m – Transport height: 4.34m – Blade type: U – Track width: 710mm