Table of Contents
What is shiplap used for?
Shiplap wood is a long, narrow board with grooves rabbeted (or cut) into the top and bottom of its long sides. Traditionally, shiplap wood has been used as exterior siding but increasingly is found in homes as a wall treatment. Shiplap’s rabbeted grooves are the key feature that defines the board.
What are the dimensions of shiplap?
1×6 shiplap boards are the most commonly used width of shiplap. Smaller than the 1×8 inch width, this 6-inch shiplap size provides the most classic, versatile look.
What is shiplap in building?
What is shiplap exactly? Traditionally it is wood board that is used to construct the walls of barns, sheds, and outbuildings. They are overlapped to create channels and visible gaps. It can either be left unfinished for a rustic feel, stained to bring out the wood grain, or painted for a more uniform look.
Why is it called shiplap?
Shiplap likely gets its name from a style of shiplap that was once used to make ships. The same overlapping joint that makes true shiplap tight and weatherproof in a house made for a water-tight ship, too.
What is the thickness of shiplap?
Fortunately, shiplap comes in numerous widths to best fit the interior design of your home; however, 5 ½-inch and 7 ¼ -inch are the most commonly used widths. You can use one width of shiplap board to create your home’s style, or you can mix the widths to create a unique design.
What is the depth of shiplap?
Ship Lap Siding is a type of Drop Lap siding with a tight “flush joint” profile. It is similar to tongue and groove but with a single over lap – usually 1/2″ in depth but can be more or less depending on the width of the board 6″, 8″, 10″ or the shiplap profile selected.
What is the spacing between shiplap?
1/8 inch
Spacing the Boards: Enlist spacers to create uniform gaps (typically 1/8 inch) between each board. You can use any type of spacer you’d like, such as the edge of a carpenter’s square or tile spacers. Make sure that you position each board using the same spacer so the boards appear evenly spaced.
What material is used for shiplap?
The most common (and affordable) way to re-create a shiplap look from scratch is to use plywood. Look for ¾-inch AC plywood (which is pre-sanded on one side) and avoid the cheapest variety of plywood (which is rough on both sides and has a tendency to chip).
What’s so great about shiplap?
Unlike the metal sidings like aluminum and steel, shiplap sidings are resistant to both corrosion and rusting, because they are sourced from organic materials. Another advantage is, it is more resistant to variations in temperature. Furthermore, it is also very resistant to the formation of scratches and dents.
Do you need drywall under shiplap?
If don’t already have drywall installed, you do not need it as a base for affixing shiplap. You can install shiplap directly to your studs to save on time, money, and mess.
How do I stop shiplap from warping?
Depending on the type of paint or stain, this small amount of moisture reintroduction can be enough to cause slight cupping and warping as it dries. We recommend priming the entire board so the board dries in a consistent manner or installing the board prior to painting.
What type of plywood do you use for shiplap?
¾-inch AC plywood
The most common (and affordable) way to re-create a shiplap look from scratch is to use plywood. Look for ¾-inch AC plywood (which is pre-sanded on one side) and avoid the cheapest variety of plywood (which is rough on both sides and has a tendency to chip).
Can I nail shiplap directly to studs?
Installing Shiplap Directly To Studs The answer is yes. The advantage of installing shiplap directly to the studs is that you save yourself the hassle of having to find the studs. Make sure your boards are level and then use a brad nailer to nail it to the stud.