What is Socketless hose?
Featuring the same AQP inner hose material as the stainless braid and StartLite hoses, SOCKETLESS is compatible with petroleum and synthetic lubricants, hydrocarbon fuels and liquid engine coolants. It operates at higher temperatures for longer work periods.
What is AQP rubber?
AQP High Pressure Hose is ideal for power steering, hydraulics, air, fuel and lubricating oil applications. It has a blue abrasion resistant fabric cover and an AQP synthetic rubber inner tube. It uses standard steel and brass reusable fittings.
Who makes Aeroquip fittings?
the Eaton Corporation
The Aeroquip brand is part of the Eaton Corporation portfolio. Eaton is a worldwide leading manufacturer of a wide variety of fluid-conveying and fluid-connecting products.
Are Earls fittings made in USA?
Manufacturing is headquartered in Bowling Green, KY and has four secondary distribution locations in Indianapolis on Gasoline Alley, Earl’s UK at the track at Silverstone, Earl’s Australia located in Sydney, and Earls Store 1 in Lawndale California.
What is hose size?
Hose sizes are designated based on the inner diameter of the hose, which is the measurement of the straight distance between the two furthest points on the inner surface of the tube. Virtually all hoses made globally are made on inch sizes even if given a metric size designation.
Where are Fragola fittings made?
in the USA
Proudly Made in the USA Fragola Performance Systems manufactures 99% of our parts in our Connecticut facility, run by the Fragola family.
How much does it cost to tighten an fitting?
Tightening Method 1: Torque
| AN Fitting Size | Aluminum Fittings | Steel Fittings |
|---|---|---|
| 4AN | 100-140 | 135-150 |
| 6AN | 150-195 | 270-300 |
| 8AN | 270-350 | 450-500 |
| 10AN | 360-430 | 650-700 |
What size hose is 10 an?
5/8″
Russell Performance Technical Support
| AN Size | Metal Tube O.D. | Thread Size |
|---|---|---|
| -10 AN | 5/8″ | 7/8″ – 14 SAE |
| -12 AN | 3/4″ | 1-1/16″ – 12 SAE |
| -16 AN | 1″ | 1-5/16″ – 12 SAE |
| -20 AN | 1-1/4″ | 1-5/8″ – 12 SAE |
Who owns Fragola?
All of the companies are owned and operated by the Fragola family. Frank, Mickey, Maria, Al & Debbie have grown up in the business and have worked in every department in the factories. We are now starting on our 3 generation of the family as the grandchildren are learning the business as well.
Are Fragola fittings made in USA?
Proudly Made in the USA Fragola Performance Systems manufactures 99% of our parts in our Connecticut facility, run by the Fragola family.
What happens if you over tighten a compression fitting?
The tubing will bulge and stick inside of the fitting if the ferrules are overly secure. If you can’t disassemble the valve or fitting, it’s a good indicator that the connection is much too tight. The only thing to do in this instance is to remove and replace the fitting in question.
How do you torque a hose fitting?
When using aluminum and steel fittings, use the torque for the aluminum fitting. For best results, torque to the low end of the torque range. If it leaks, tighten it until the leak stops (without exceeding the max torque). Lightly lubricate the threads and sealing surfaces with oil before assembly.
Can PTFE hose be clamped?
PTFE hose is too stiff for hose clamps. It won’t “crush” onto a fitting to create a good seal, so unique aluminum AN fittings (developed by TechAFX) must be used to secure it. PTFE is stiffer than rubber hose material, even though it has a much smaller outside diameter (about one-third the size, to be precise).
How do Aeroquip’s socketless fittings work?
Designed with 2 and 3 barbed ends to create the connection, Aeroquip’s Socketless fittings are extremely easy to work with! Connecting the hose and fittings simply requires slipping the hose onto the fitting – no wrenches required! Under pressure the hose contracts to create a tight fit around the fitting.
Why choose AQP socketless performance hose?
Featuring a textile braid reinforcement, AQP elastomer cover, an elastomer smooth bore inner tube and two layline color options, AQP SOCKETLESS hose is best in its class. Eaton’s AQP SOCKETLESS Performance Hose and Fittings are extremely easy to work with. Connecting the two is a snap since not even a wrench is needed!
What is socketless performance hose?
Eaton’s AQP SOCKETLESS Performance Hose and Fittings are extremely easy to work with. Connecting the two is a snap since not even a wrench is needed! Featuring the same AQP inner hose material as the stainless braid and StartLite hoses, SOCKETLESS is compatible with petroleum and synthetic lubricants, hydrocarbon fuels and liquid engine coolants.
How do I connect the hose and fittings?
Connecting the hose and fittings simply requires slipping the hose onto the fitting – no wrenches required! Under pressure the hose contracts to create a tight fit around the fitting. Most products in the catalog can be ordered in either bulk or clamshell package styles by changing the prefix accordingly.