Where should a shower body spray be placed?
The shower valve should be placed about waist high, which is approximately 36″ from the floor of the shower. The lowest body spray is usually placed at knee or thigh height. The middle body spray is usually placed at hip or waist level. The highest body spray is usually placed at shoulder or back height.
What are body sprays in shower?
They are ideal if you want to shower without getting your hair wet. And they have a therapeutic value providing a concentrated spray on the chest, back or thighs. Body sprays work best in large showers to contain the overspray.” Dana King, NEXT Project Studio.
What height should a shower valve be?
30-50 inches
The average height for a shower valve is 30-50 inches above the floor, though this is a general range. For tub-shower units, the height can be just a few inches about the tub or directly on the tub as part of the faucet.
What is the height of a shower head?
80 inches
There are perfectly good explanations for why experts settled on 80 inches as the standard height, and they link it to the need to accommodate as many people as possible. They base the height setting on average height. That means more people will be comfortable with it.
What are body jets for?
Body spray massage jets, a rain shower head, a hand shower, and a tub spout on this system will bring luxury to any shower. Exceptionally-safe, this item has hot and cold thermostatic valve controls to allow adjustments to water flow without changing the water temperature.
How do you clean a shower body spray?
Cleaning Tips
- Rub spray face and nozzles with a soft, dampened sponge or cloth. Run the water and repeat if necessary.
- Never use an abrasive material such as a brush or scouring pad to clean surfaces.
How far should the shower head be from the wall?
Typically, a wall-mounted or fixed shower head should be about 3 to 4 inches from the wall. If you angle the shower arm at 100 or 120 degrees, you’d have enough space to move around your bathing enclosure without bumping against the wall.
Can you add body jets to a shower?
Body sprays should be installed on the opposite wall as the shower head and not aimed at the shower door. The top level body spray is usually set at shoulder height or back height rather than in the users face or back of the head. The mid level body spray is usually set at waist or hip level.
What is the proper height for a shower head?
According to Hunker, the industry standard for how high a shower head should be is 80 inches. We’re talking 80 inches above the floor of the bathroom.
Can two shower heads run at the same time?
Diverter Valve There are two main types of dual shower head diverter valves: Two-way diverter valves switch between the two shower heads. Three-way diverter valves let you choose between the individual shower heads or both shower heads at the same time.
How many body sprays do you own?
Typically, three sprays are used and installed in a vertical line. Ideal body spray placement is intended to cover the entire body with water no matter which way the person is facing. Body sprays should be installed on the opposite wall as the shower head and not aimed at the shower door.
Why is my shower head spraying in different directions?
If your shower head is spraying every which way or not providing a consistent water pressure, chances are it could use a good cleaning. Shower heads often spray unevenly because their tiny holes have gotten plugged with mineral deposits. In order for water to flow freely, you need to remove these deposits.
What is the standard height for shower body?
Standard Shower Head Height The standard showerhead height is about 80″ as this has been proven to be the safest and most comfortable in general. This is with a ceiling of around 90″ but the ceiling height isn’t usually taken into account.
How do I choose the best body shower body spray system?
Pay attention to the flow rate of the valve and make sure your spray outlets will not use more water than is available. Even the best body shower body spray system will not be great without a plan for adequate water pressure. You want to make sure all shower heads and all body spray jets are flowing at maximum capacity.
How does a body spray shower system work?
For body spray shower systems you will want the water to be a comfortable warm temperature. Therefore, the hot water must be mixed with cold water to a suitable temperature. The mixing valve inside the wall is connected to the hot and cold water lines.
Where do the body sprays go in a Delta shower system?
Although our graphic shows the body sprays on the left and hand shower on the right, you can easily swap these spray groups and place them where it makes most sense for you. Delta shower systems with body jets benefit greatly from the addition of a hand shower.
Can you use body spray in a shower system in California?
If you would still like a shower system and live in California, we recommend you give up the idea of having body sprays and perhaps instead go with a non-shared diverter shower system with showerhead and hand spray only as outlined in our Hand Shower and Showerhead System Article.