Table of Contents
How do I register my EPIRB in Australia?
Beacon registration is valid for two years and renewal can be done online on the beacon registration system or by contacting 1800 406 406. Whenever your contact details or beacon details change, please update them online.
What is EPIRB registration?
This Safety Alert addresses the importance of ensuring your Emergency Position Indicating Radio Beacon (EPIRB) and Personal Locator Beacon (PLB) are properly registered with the National Oceanic and Atmospheric Administration (NOAA).
Does EPIRB expire?
A. EPIRB batteries need to be replaced before the expiry date noted on the label of the beacon. This is so the beacon can transmit for the minimum time required once activated.
Are EPIRBs mandatory?
Emergency Position Indicating Radio Beacon (EPIRB) An EPIRB must transmit on 406 MHz and conform with Standard AS/NZS 4280.1. You must also register your EPIRB with the Australian Maritime Safety Authority (AMSA). If you’re on open waters and more than 2nm from the shore, you must have an EPIRB.
How do I know when my EPIRB expires?
What do you need to do, and how do you expose of the EPIRB? There’ll be a sticker on your beacon with your registration details, and its expiry date. On the other side of the EPIRB, it will have printed the date that you need to replace the EPIRB with a new one.
How many EPIRB is mandatory?
AN EPIRB is a SECONDARY means of DISTRESS alerting which is to say that it comes later in the hierarchy of alerting SAR authorities in case of distress. It is mandatory to carry one EPIRB on every ship and two EPIRBS for all Registered ships (and other types of vessels).
How do I register my GME EPIRB?
Visit www.beacons.amsa.gov.au and click the ‘Register a beacon’ button.
How do I activate my EPIRB?
The procedure to do so is as follows:
- Press and release the test button on the EPIRB.
- The red lamp on the EPIRB should flash once.
- Within 30 seconds of pressing the button, the strobe, as well as the red light, should flash several times.
- After 60 seconds of operation, the EPIRB will switch off.
How do I dispose of out of date EPIRB?
Updated disposal options for unwanted beacons
- Contact your local battery store. A small fee may apply.
- Disconnect the beacon battery according to the manufacturer’s instructions. Then contact your local waste management facility to ask about environmentally friendly disposal options. A small fee may apply.
How do I deregister an EPIRB?
Deregister your expiring or expired EPIRB via the AMSA website link above (in blue). Otherwise if the EPIRB accidentally activates they will come looking for you.
- Deregister your expiring or expired EPIRB via the AMSA website link above (in blue).
- Remove the battery according to the manufacturer’s instructions.
How often should an EPIRB be tested?
monthly
(b) Each Emergency Position Indicating Radio Beacon (EPIRB) and each Search and Rescue Transponder (SART), other than an EPIRB or SART in an inflatable liferaft, must be tested monthly. The EPIRB must be tested using the integrated test circuit and the output indicator (test button) to determine that it works.
How far offshore Do you need an EPIRB?
Any boat operating more than 2 nautical miles from the shore has to have an EPIR irrespective their lenghth.
What do you do with out of date EPIRBs?
Expired beacons must be disposed of correctly. Some battery shops will take the EPIRB, then remove the battery and dispose of it for you (generally a fee is charged for this service).
How do I dispose of an EPIRB in Australia?
Unwanted EPIRBs can be:
- Handed in for safe disposal at Marine Operations, 14 Capo D’Orlando Drive, Fremantle.
- Left in marked bins at Battery World stores around Australia, (disposal fees may apply).
- Disarmed by following the manufacturer’s instructions.
How many years is the service interval for EPIRBs?
Maintenance of EPIRB In the event that the HRU has crossed its expiry date, the HRU ought to be replaced on board and HRU must be marked with an expiry date 2 years into the future.