Table of Contents
What is best to use for basement walls?
6 Basement Wall Options
- ZenWall Panels. ZenWall panels have an insulated ocre and reflective backing.
- BrightWall Paneling.
- CleanSpace Wall System.
- Foamax.
- Basement to Beautiful Panels.
- Total Basement Finishing EverLast Wall Panels.
Do you insulate basement walls before framing?
Rigid foam sheets are best for DIYers who are insulating basements prior to framing the walls. Rigid foam also works well when the concrete or block walls are smooth and flat. Rigid foam insulation is easy to use. In addition to scoring, it can be cut by an ordinary wood saw.
Do you need a vapor barrier on basement concrete wall?
Building codes usually require a vapor barrier (4 mil plastic sheeting) on exterior basement walls if the framing is attached to masonry or concrete surfaces, or if the wood framing butts up against the outer basement walls.
How much to frame and sheetrock a basement?
It costs $1,795 on average to frame a basement, not including insulation and drywall. Framing costs approximately $7 to $16 per linear foot on its own, but $20 to $30 per linear foot with drywall.
Do I need to insulate basement walls below grade?
Your best bang for the dollar in this instance is to insulate the coldest part of the wall, again typically to 2-feet below grade. However, there are many instances where insulating the full wall is the best option, such as if your walls are stone, or the floor is earth or crushed stone with no vapor barrier.
Should I use plastic on basement walls?
Should I use Visqueen or plastic sheeting on the framed basement walls? No, you should not, as plastic will prevent moisture from moving through the wall and will lead to mold and damage.
Should I put drywall in my basement?
Due to the often damp conditions of the basement, be sure to choose sheetrock that is at least moisture-resistant (often call greenboard) but be on the lookout for products that are specifically resistant to mold and mildew (some kinds of purple board).
Should basement drywall touch the floor?
Drywall should NOT touch the floor. Allow for floor and wall expansion without cracking the drywall by keeping a 1/2-inch (1.27-cm) space between them. This space also aids in preventing moisture from seeping if the floor floods.
Should basement walls have a vapor barrier?
Steve Bliss, of BuildingAdvisor.com, writes: The short answer is: Don’t use a vapor barrier in a finished basement. This is asking for trouble, especially with a full bathroom, which generates a lot of humid air. Rigid foam board on the interior, like you have, is the ideal insulation.
How to frame and insulate a basement wall?
Always ensure that your installation is as clear and accessible as possible. You’ll need to be able to move around easily and access all required areas.
How to build a basement wall?
Make a scale drawing of your plans to submit to your local building inspections department.
What is the best insulation board for basement walls?
The original crawlspace walls have a tar-like substance with some form of yellow fiberglass insulation adhered to the wall.
How do you replace a basement wall?
Clean any parts of the wall that you plan to repair.