Can I use Molex to SATA adapter?

Can I use Molex to SATA adapter?

With a simple molex connection, you can attach up to 4 SATA devices. That’s enough for an SSD, an HDD, and a Blu-Ray drive, with an extra plug left over for later expansion. Cable management is very easy.

Which has more power SATA or Molex?

Technically Molex can carry much more power than the SATA power connector. Molex has 2 power pins (one 5V and on 12V pin), each can deliver 11Amps for a total of 22Amps. The other 2 pins are ground wires… SATA power connectors has a total of 15 pins of which 9 are power pins (3 x 3.3V, 3 x 5V, 3 x 12V).

How much power can a Molex cable carry?

The ATX standard for SATA or Molex connections is rated for 54 watts. Each SATA/Molex connector provides three 12v pins at 1.5 amps each, for a total of 4.5 amps. 12 volts, times 4.5 amps, equals 54 watts able to be provided by a SATA/Molex connector.

Is it OK to power riser with SATA?

Yes, with a SATA connection there is a risk of fire, but not in all cases. SATA connectors are designed to withstand 4.5 amps (therefore, for 54 watts) on 12V DC. The PCIe specification allows a GPU to draw 5.5 amps (66-75w) from the PCIe 3.0 12V bus, therefore from the x16 riser slot.

Can I use SSD without power cable?

SATA 2.5″ SSDs Require Power! A SATA power cable coming from the Power Supply Unit to the SSD drive. A SATA data cable connected to motherboard on one end and to the SSD drive on the other end.

Can you daisy chain a SATA cable?

No, not directly. Your only options are to use a port multiplier or to add additional SATA or SAS connectors.

Can I use 2 Molex to power GPU?

Reputable. Yes, using an adapter is safe.

How much power does a 4 pin Molex put out?

The Molex designed 4 pin connector itself can handle 156 watts.

Does SATA cable provide power?

A typical hard drive including a 3.5″ HDD, 2.5″ HDD and 2.5″ SATA SSDs, all require a SATA Data cable and a SATA Power connector. So long story short. A typical SATA cable, aka SATA DATA cable, DOES NOT provide power. The power to the drives is delivered through the SATA power cables.

Is it OK to split SATA power?

Power wise, it is not an issue unless you are running your full system off one cable with tons of splitters. I have splitters for years without issues. I even add more ends to them to use in tight spots that a 90 degree fits best. I have never had an issue at all.

Can one SATA cable power multiple drives?

Yes, you can connect multiple devices on one SATA power cable.

Do hard drives need SATA power?

The hard drive adapter requires power from your system’s USB port. Although you can plug in any standard SATA drive, USB ports only supply a limited amount of power and are not able to power all of the SATA drives plugged into the cable. As a general rule, the hard drive adapter only supports 2.5 in.

Can SSD work without power cable?

Why does SATA power cable have so many ends?

The new SATA power connector contains many more pins for several reasons: 3.3 V is supplied along with the traditional 5 V and 12 V supplies. To reduce impedance and increase current capability, each voltage is supplied by three pins in parallel, though one pin in each group is intended for precharging.