Table of Contents
How do you administer Purdue Pegboard?
Small metal pegs are placed in the cup on the side being tested, with subjects asked to remove the pegs and place them vertically in the holes as rapidly as possible. The number of pegs placed in 30 seconds is scored. The original application for the test was for testing the dexterity of industrial workers.
How do you score the Purdue Pegboard Test?
Scores are derived for each part of the test. The scores for the pin (peg) placement subtests consist of the number of pins inserted in the time period for each hand. The score for the bimanual condition consists of the total number of pairs of pins inserted.
Is the Purdue Pegboard Test timed?
D., (1948), an Industrial Psychologist at Purdue University. Time required to administer: The original Purdue Pegboard Test prescribed testing time for 90 seconds, 30 seconds for each condition (it has since been modified by several different people on the test procedure).
What does Purdue Pegboard Test assess?
Purpose. The Purdue Pegboard Test (PPT) is a test of fingertip dexterity and gross movement of the hand, fingers and arm in patients with impairments of the upper extremity resulting from neurological and musculoskeletal conditions.
How do you score grooved pegboard?
The task is performed once with the dominant and then once with the non-dominant hand. For each hand, the three scores are summed (the total time, total number of drops and the total number of pegs correctly placed in the board) to get complete score.
How do you score a 9 hole peg test?
Scoring. The score for the 9-HPT is an average of the four trials. The two trials for each hand are averaged, converted to the reciprocals of the mean times for each hand and then the two reciprocals are averaged. This score can be used individually or used as part of the MSFC composite score.
What does the peg board test measure?
The Purdue Pegboard Test is a psychomotor test of manual dexterity and bimanual coordination. The test involves two different abilities: gross movements of arms, hands, and fingers, and fine motor extremity, also called “fingerprint” dexterity.
What does the grooved pegboard measure?
The Grooved Pegboard Test (GPT) is used primarily as a measure of motor functioning, but some research indicates that performance on this test my also reflect cognitive factors, particularly attention and executive functioning.
How long does it take to administer the grooved pegboard test?
Administration Time The time required is 5 minutes. Scoring The score is computed for each hand separately and is the time required to place the pegs.
What materials do you need to complete the nine hole peg test?
Equipment Required
- Wood or plastic board with 9 holes (10 mm diameter, 15 mm depth), placed 32 or 50 mm apart.
- A container for the pegs: square box (100 x 100 x 10 mm) away from the board. Or, a shallow round dish at the end of the board.
- 9 pegs (7 mm diameter, 32 mm length)
- Stopwatch.
What is 9 hole peg test?
The Nine Hole Peg Test (NHPT) was developed to measure finger dexterity, also known as fine manual dexterity. It can be used with a wide range of populations, including clients with stroke. 20% of cases are a hemorrhage in the brain caused by a rupture or leakage from a blood vessel.
What does 9 hole peg test tell you?
What is a two peg test?
A two peg test checks whether your dumpy level is capable of showing a true horizontal reading. This is vital to ensure your measurements are accurate and reliable. The two peg test tells you the measurement that your level is out over the distance you test over.
What is the normal time for a 9 hole peg test?
Results: Average time to complete the 9HPT was 31.4 ± 15.7 s with the dominant and 32.2 ± 12.4 s with the nondominant hand. Test-retest reliability of 2 trials performed with the same hand was high (dominant ICC2,1 = 0.88, nondominant ICC2,1 = 0.91).
How long does it take to administer the 9 hole peg test?
The pegs/s is calculated based on nine pegs placed compared to the time needed to complete the test. In case the person is not able the complete the test, the pegs/s is calculated using the number of pegs placed compared to the time limit of 300 seconds.
Is there a manual for administering the Purdue Pegboard Test?
Before administering the Purdue Pegboard Test, the test administrator is advised to carefully read this section of the manual. As with any standardized test, it is important to follow the directions very closely.
How many pins should be on a Purdue Pegboard?
General Instructions The subject should be comfortably seated at the testing table directly in front of the Purdue Pegboard, which is placed on the table with the row of cups (Under the nameplate) at the top of the board. The far right and far left cups should have 25 pins in each to equal a total of 50 pins.
What are the instructions that come with a Purdue test?
The instructions that come with a Purdue test indicate to the person being tested, “This is a test to see how quickly and accurately you can work with your hands”. Normally the person being assessed sits at a table and follows instructions from a test administrator while being timed.
How many children are on the Purdue Pegboard?
The Purdue Pegboard: Normative data on 1334 school children. Journal of Clinical Child Psychology, 8, 156-162. Judge, J., & Stirling, J. (2003). Fine motor skill performance in left- and right-handers: Evidence of an advantage for left-handers. Laterality, 8, 297-306.