Table of Contents
How do I get my iPhone to recognize my Epson printer?
Connecting to a Printer via Wi-Fi Direct
- Open the Epson iPrint app.
- Tap Printer is not selected. Tap here to select a printer.
- Tap Wi-Fi Direct Setup.
- Do one of the following: If your printer has an LCD screen, tap Printer with LCD Screen.
- Follow the steps on your device’s screen to connect to your printer directly.
How do I reset my Epson iPrint?
Resetting the Printer
- Turn the printer off.
- Use a paper clip or tip of a pen to press and hold the reset on the back of the printer:
- While holding the reset button, turn the printer on.
- After 5 seconds, a warning will print out.
Why is my Epson printer not Printing from my iPhone?
Check that the printer has its wireless connection switched on. Ensure your iOS device is not in AirPlane mode. Ensure all devices are on the same network. Check that both the iPhone/iPad and printer are running the latest software.
Why is my phone not connecting to my Epson printer?
Check that the device containing Epson iPrint is connected to the network. The device and the printer are not on the same network: Check that the wireless LAN network (SSID) that the device is connected to is same as the printer’s network. Epson iPrint searches for printers that are on the same network.
Why is my Epson printer not discoverable?
Answer. This can be caused by a faulty USB cable, bad interface card on the printer, improper interface type selected in the printer settings or having the wrong driver installed on the computer. The easiest issue to check is the drivers. Try uninstalling the current driver, and downloading the correct one.
Why won’t my phone find my printer?
Restart all devices to clear network and hardware error states. Turn off the printer, and then turn it on again. Disconnect the power cable from the router, wait ten seconds, reconnect the cable, and then wait for the internet connection to complete. Turn off your phone or tablet, and then turn it on again.
How do I connect my phone to my Epson wireless printer?
On your Android device, download the Epson Print Enabler plug-in from Google Play. Go to Settings on your Android device, select Printing, and enable the Epson plug-in. Connect your Android device to the same wireless network as your product. Now you are ready to print.
How do I reset the wifi on my Epson printer?
If necessary, press the Home button on the control panel to return to the Home menu, then select Setup. Press , then press Restore Default Settings. Press Reset Network Settings. Select Yes as necessary to reset the printer’s network settings.
Why won’t my Epson connect to the Wi-Fi?
If the product doesn’t connect to your wireless network, the WEP key or WPA passphrase may have been entered incorrectly. Verify that the product is turned on and connected to your network. If your connection is wireless, the WiFi light should be on. See your Quick Guide for details.
How do I reset the IP address of my Epson printer?
While holding the reset button, turn the printer on. Continue to hold the reset button. After 5 seconds, a warning will print out. Release the reset button. After about 5 more seconds, another sheet will print showing the factory reset IP address of the printer. Newer Epson models will default to a DHCP address.
How do I Reset my canon Pixma Pixma printer?
Turn the printer off. Use a paper clip or tip of a pen to press and hold the reset on the back of the printer: While holding the reset button, turn the printer on. Continue to hold the reset button. After 5 seconds, a warning will print out. Release the reset button.
How do I connect my iPad to an Epson printer?
If your Epson printer gives a factory default address of 192.168.192.168, you will need to temporarily change your iPad IP address to communicate with the printer. Tap the IP address and change it to 192.168.192.100 (though any number in the range of 192.168.192.xxx should work): Tap Save in the top right corner.