Table of Contents
What is the correct order for setting up a router?
Step 1: Place your wireless router.
How does a router work with CCNA?
A router is a network device that routes packets from one network to another. It is usually connected to two or more different networks. When a packet comes to a router port, the router reads the address information in the packet to determine out which port the packet will be sent.
What is routing configuration?
Routing configuration involves adding a default route, adding routes to networks that are not directly connected, and adding routes to networks that can be reached through route-based VPNs. Add routers. A Router element represents a next-hop gateway’s IP address in routing configurations.
What are the major elements of a typical router configuration?
Four components of a router can be identified:
- Input ports. The input port performs several functions.
- Switching fabric. The switching fabric connects the router’s input ports to its output ports.
- Output ports.
- Routing processor.
What tasks should be completed when initially configuring a router Please list all detailed CLI commands to elaborate and justify?
The following tasks should be completed when configuring initial settings on a router.
- Configure the device name. Router(config)# hostname.
- Secure privileged EXEC mode.
- Secure user EXEC mode.
- Secure remote Telnet / SSH access.
- Secure all passwords in the config file.
- Provide legal notification.
- Save the configuration.
How routers work step by step?
Let’s step through the process of routing a packet from a source to a destination.
- Step 1: Send packet to router. Computers send the first packet to the nearest router.
- Step 2: Router receives packet.
- Step 3: Router forwards packet.
- Step 4: Final router forwards message.
What is WAN on a router?
What is WAN? A Wide Area Network (WAN) is a network that exists over a large-scale geographical area. Your modem sends and receives information to and from the internet through its WAN port.
How do I configure a simple router?
Task 2: Perform Basic Configuration of Router R1.
- Step 1: Establish a HyperTerminal session to router R1.
- Step 2: Enter privileged EXEC mode.
- Step 3: Enter global configuration mode.
- Step 4: Configure the router name as R1.
- Step 5: Disable DNS lookup.
- Step 6: Configure the EXEC mode password.
What is router with diagram?
The router is a physical or virtual internetworking device that is designed to receive, analyze, and forward data packets between computer networks….Difference between Bridge and Router.
| Bridge | Router |
|---|---|
| The bridge does not use any table to forward the data. | The router uses a routing table to send the data. |
Where can I find documentation about basic Cisco router configuration?
For documentation about basic router configuration from Cisco, visit their page. For details from Cisco on configuring Telnet, Console and AUX passwords, click here. This first lab (1-1) covers basic Cisco router network configuration. I will walk you through all of the commands to accomplish each objective of this lab.
How do I find the configuration mode of my router?
The global configuration mode is shown by the prompt: (config)# as shown below: NOTE: To enter this mode from the privileged exec mode we enter the command: “Configure terminal” Specific configuration mode. There are other specific configuration modes on the router.
What configuration is used to configure the interface of a router?
Some of the configurations used to configure an interface are Network layer addresses (IP Addresses), media type, bandwidth, and other administrator commands. Different routers use different methods to choose the interfaces used on them.
How do I access the CLI from a Cisco router?
The commands needed to do this are: The first line specifies that the password for the console on this router is “ cisco” and the second line – “ login” states that for anyone to access this router, you will need to enter a password to access the CLI using the console port.