Table of Contents
How do I clear the HL code on my Arctic Spa?
HL. The system has shut the heater down because the temperature at the heater has reached 119ºF (48ºC). Do not enter the water! Remove the spa cover and allow the water to cool down, then the shut power off and power your spa up again to reset the system.
How do you fix the HL code on a hot tub?
The High Limit Switch Needs to Be Reset or Replaced Simply reset by pressing the big red button on your spa pack. The high limit switch may be housed in a thermowell. If the water temperature in the thermowell is the same as the water temperature in the rest of the spa, the switch is damaged and needs to be replaced.
What does HL mean on a Jacuzzi?
HL. Meaning high limit – the heater shuts down because the water has reached a certain temperature. Overheat condition detected in the hot tub.
How do I reset my Arctic Spa hot tub?
Remove the spa cover and allow water to cool. At 41.7 the spa should automatically reset. If spa does not reset, shut off power to the spa and call your supplier for a service.
What does Arctic Spa error code HL mean?
system shut the heater down
Arctic Spa Error Codes When “HL” error message displays, it means the system shut the heater down because temps at the heater reached 119ºF (48ºC). When “HL” error message is flashing, it means the system shut down because the water temps in the spa reached 112ºF (44ºC).
What does HL mean on a Cleverspa?
An HL error usually means there is a blockage, preventing water from circulating around the pump & heating system.
What does HL mean on Arctic Spa?
Arctic Spa Error Codes When “HL” error message displays, it means the system shut the heater down because temps at the heater reached 119ºF (48ºC). When “HL” error message is flashing, it means the system shut down because the water temps in the spa reached 112ºF (44ºC).
Where is the high limit reset button?
The High Limit Reset Button is located behind the gas valve.
How do I get rid of HL on Cleverspa?
An HL error usually means there is a blockage, preventing water from circulating around the pump & heating system….
- Turn off the heater.
- Remove the Filter sock and Filter.
- Place the filter sock over the filter inlet.
Is there a reset button on a spa?
Most hot tubs are fitted with a reset button in the event of overheating or a power surge. The button is typically located on the side of the control box behind the hot tub’s removable panel on the front side.