Table of Contents
How do I find my Cisco gateway IP address?
To show the interfaces in a Cisco router, use the ‘show IP interface brief’ command in the console window. For example, this command will output the following information: Each interface and interface name. The IP address for that interface.
What is the default login for Comcast modem?
If you haven’t changed your Admin Tool login, the default settings are: Username: admin. Password: password (case sensitive)
What is the default password for cisco phone?
Enter the password of the device in the Password field. The default password for the administrator is admin and for the user it is cisco. Note: If you forget the password, you can reset the phone adapter to factory defaults which in turn returns the device to the default login.
What is a default gateway Cisco?
The default gateway is the first Layer 3 device (such as a router) on the same management VLAN network to which the switch connects. The switch will forward IP packets with destination IP addresses outside the local network to the default gateway.
Does the Cisco sge2010p 48-port gigabit switch have a web interface?
Re: Cisco SGE2010P 48-port Gigabit Switch – Setup & Configure vi. SGE2000 and SGE2000P must have a DHCP server to get an IP-address. You “just” have to figure out the address they have been given.SGE2010 and SGE2010P has a default IP (192.168.1.254 – 255.255.255.0)All 4 devises has a web interface.
What is the default IP address of the SGE 2010?
You “just” have to figure out the address they have been given.SGE2010 and SGE2010P has a default IP (192.168.1.254 – 255.255.255.0)All 4 devises has a web interface. I don’t see why it shut not work with a Mac browser.
What is the default IP address of a Cisco router?
Updated November 08, 2019. Most routers and switches by Cisco have default passwords of admin or cisco, and default IP addresses of 192.168.1.1 or 192.168.1.254.
Is the sge2010 48x port 10/100/1000 Ethernet really plug and playable?
With allot of excitement i decided to purchase a SGE2010 48x port 10/100/1000 Ethernet for our company in order to get the internal DHCP, DNS and general net administration on metal. I was under the impression that the initial setup was plug and playable, but the reality was completely different.