Table of Contents
What does a remote control extender do?
An IR extender cable is an Infra-Red Eye Extension to instead of pointing the remote control directly at the TV, you can point the remote directly toward the IR Eye sensor instead, giving you a much greater range and more versatility with the remote controller features.
How can I extend my remote signal?
A: You can extend your IR remote range in just a few minutes by attaching an IR remote extender kit (IR receiver and IR emitter) to the equipment you want to control.
Where is IR sensor on cable box?
The IR sensor on the box is a cone-shaped area that is usually behind a dark plastic panel. Use a flashlight to locate it if you are not sure where it is located on your set top box.
How do I increase the range of my IR remote?
Increase the Sensitivity of IR Remote Control
- Introduction: Increase the Sensitivity of IR Remote Control.
- Step 1: The Casing Is Blocking the IR Signal.
- So, to make the IR LED expose more outside the case, you will need to de-solder the IR LED from the PCB board.
- Now, reshape the legs of the IR LED using a plier.
Can I make my cable box wireless?
With a wireless video HDMI kit, simply connect a transmitter to the existing set top box in your living room and a receiver to your TV. It’s a great option for people who don’t want to run cables across the house. Instead, you and your friends can enjoy a wireless streaming experience wherever you place your TV.
How do I program my remote to my cable box?
Press and hold the xfinity and Info buttons for five seconds. Wait for the Voice Remote light to change from red to green. Follow the instructions by entering the three-digit, on-screen pairing code. Once the on-screen pairing code is correctly entered, your Voice Remote is paired with the TV Box.
Can I use my TV remote to control my cable box?
Instead of shuffling around, you can use the remote that came with your Samsung TV. With the universal remote feature, you can control cable and satellite boxes, home theater systems, and Blu-ray players.
Where is the eye on a spectrum cable box?
From Google Search:” The new boxes are a bit fussy but the ir receiver is about 13 of the width from the left side of the box almost dead center of the height of the box. Shine a flashlight on the front panel and you will see a round bubble.”
How can I extend my cable TV to another room?
To watch TV in another room without a cable box, however, that information will have to be mirrored. To achieve that, you can attach a cable splitter between the output of your main cable box and first TV, then run one or more secondary lines to other televisions.
Can you program a universal remote to a cable box?
A: You can use your universal remote with almost anything connected to your TV. You can control your Blu-ray, DVD, VCR,DVR, cable box, satellite, digital converter box, streaming devices and more.