How do I view routes on my Cisco router?
Use the show ip route EXEC command to display the current state of the routing table….Sample Displays.
| Field | Description |
|---|---|
| Routing entry for 131.119.0.0 (mask 255.255.0.0) | Network number and mask. |
| Known via “igrp 109” | Indicates how the route was derived. |
How show routing table in Linux?
Using netstat command Netstat combined with the -r option will display the kernel routing tables. This is commonly used with the -n option, which will only show numerical addresses rather than performing any sort of name resolution.
What does ip route Show display?
The output of show ip route displays the entries in the routing table, as well as the means by which they were determined (directly connected network, static route, or which routing protocol was used to select the route).
How do I view an ip route table?
The -r option of netstat displays the IP routing table. On the command line, type the following command. The first column shows the destination network, the second the router through which packets are forwarded. The U flag indicates that the route is up; the G flag indicates that the route is to a gateway.
What command would you use to display the route table?
You can display the routing table using the netstat -rn command or the route -s command.
What is the show running-config command?
The show running-config command shows the router, switch, or firewall’s current configuration. The running-configuration is the config that is in the router’s memory. You change this config when you make changes to the router.
How do I change my metric route to default?
Workaround 1: Manually add the default route for the Interface
- Click Start, click Run, type cmd in the Open box, and then click OK.
- Type route print, and then press ENTER to view the routing table.
- Type the following command, and then press ENTER route add 0.0.0.0 mask 0.0.0.0 gateway IP metric 30 if Interface number.
How do I find network routes?
To run traceroute on Windows:
- Open the command prompt. Go to Start > Run.
- In the command prompt, type: tracert hostname.
- You may have to wait up to a minute or more for the test to complete.
- Send us the complete results (every line) for analysis.
What is metric in route Linux?
A metric is a value that’s assigned to an IP route for a particular network interface. It identifies the cost that’s associated with using that route. For example, the metric can be valued in terms of link speed, hop count, or time delay.