What battery does Polar ft4 use?
CR 1632 Battery
FT4 Training Computer
Battery type | CR 1632 |
---|---|
Battery life | Average 12 months (training 0.5 h/day, 7 days/week) |
Operating temperature | -10 °C to +50 °C / 14 °F to 122 °F |
Back cover | Polyamide |
Wrist strap material | Polyurethane |
What size battery does a polar watch take?
CR2025
Battery Type The Polar H1 and H7 Heart Rate Sensors take one CR2025, which is a 3-volt lithium coin cell battery.
What kind of battery does a Polar watch take?
Energizer CR1632 Lithium Battery 3V (2 Batteries)
Can you replace the battery in Polar ignite?
*The battery cannot be replaced. At the end of the battery’s life cycle, the entire device must be replaced. When changing the battery, replace the sealing ring if it seems damaged. Please refer to user manual for closer instructions.
How do you change the time on a Polar FT4 watch?
Watch Settings Select Settings > Watch, time and date .
How do you turn off Polar FT4?
Start With Basic Settings To activate your Polar FT4 training computer, press and hold any button for one second. Once FT4 is activated, it cannot be switched off.
How do you change the battery in a polar h9?
Remove the old battery from the battery cover. 3. Insert the new battery (CR2025) inside the cover with the negative (-) side outwards. 4.
How long does a Polar watch last?
Up to 50 hours in training mode with wrist-based heart rate and connected GPS, or. Up to 4 days in watch mode with continuous heart rate tracking.
What size battery does a Polar watch take?
Does Polar heart monitor have a battery?
Battery Type The Polar H1 and H7 Heart Rate Sensors take one CR2025, which is a 3-volt lithium coin cell battery. Note: The Polar H1 Heart Rate Sensor was previously called the Polar Wearlink chest belt.
How do you change the time on a polar watch?
How do I change the battery in my Polar device?
Depending on the model of your Polar device you can either change the battery yourself or you need to have it changed by a Polar-authorized service center that only uses Polar-approved components. With every battery change, Polar performs a full periodic and water resistance check.
Can I use the polar FT4 with a pacemaker or defibrillator?
If you have a pacemaker, defibrillator or other implanted electronic device, you use the Polar FT4 at your own risk. Before starting use, take a maximal training stress test under the supervision of a physician. The test is to ensure the safety and reliability of the simultaneous use of the pacemaker and the Polar FT4.
What is the battery life of my Polar device?
Battery life time depends highly on how much you use the device. For estimated average battery life of your Polar device, please refer to product user manual. For many Polar devices the battery is inserted at the factory. In the package, even though not active, the battery still has shelf life.