How do I connect my Vonets WiFi Bridge?
Turn off WiFi and unplug any network cables from your computer. Plug the Vonets Ethernet cable into the Ethernet port on your computer. Wait about 30 seconds for the Vonets and your computer to establish a connection. Your preferred WiFi network should appear in a list of available WiFi networks.
What is VAP11G?
Vonets VAP11G WiFi Bridge allows a WiFi connection in devices that only have RJ45 network port. Its simple setup, in 2 minutes. Need feeding between 5V and 15V obtainable USB port or external power supply.
How do I factory reset my Vonets VAP11G?
How to factory reset (hard reset) Vonets VAP11G :
- When the router is on, press the button reset and hold for 30 seconds.
- While holding down the button reset, turn off the power of the router and hold down the button reset for 30 seconds.
How do I log into Vonet?
Type 192.168. 252.254 (the most common IP for Vonets routers) in the address bar of your web browser to access the router’s web-based user interface. You should see 2 text fields where you can enter a username and a password. The default username for your Vonets router is root.
How do I set up Vonets VAR11N 300?
VAR11N-300 is a plug-and-play mini WiFi router and WiFi bridge. On a business trip or a travel stay in a hotel, simply connect the ethernet cable in the hotel room to the ethernet port of the VAR11N-300, then connect the power supply, the entire room is WiFi coverage.
What is a Wi-Fi bridge used for?
What is a WiFi bridge? A WiFi bridge replaces ethernet cabling. It is set up in a fixed configuration to have one purpose. In a point-to-point configuration, typically in outdoor environments the bridge will be designed to span a distance to carry data from a point to another as if you had a cable joining the two.
Why do you need a Wi-Fi bridge?
A WiFi bridge replaces ethernet cabling. It is set up in a fixed configuration to have one purpose. In a point-to-point configuration, typically in outdoor environments the bridge will be designed to span a distance to carry data from a point to another as if you had a cable joining the two.
How do I factory reset my Vonet?
1) Users can enter VONETS device configuration interface, open the System Settings, click on “Restore the factory” to restore the factory VOENTS device. Also, you can restore the factory by pressing “reset” button about five seconds.
How do I reset my Vonets var11n 300?
Should I bridge my Wi-Fi?
Bridge mode is most effective when you’re moving farther away from your router and need extended WiFi coverage. Also, it helps devices connected to the private network communicate with each other without any performance issues.
How do I set up VONETS VAR11N 300?
What is vonets Wi-Fi bridge vap11g?
I’ve recently bought VONETS Wi-Fi Bridge VAP11G. It lets you connect LAN device (i.e. printer with LAN port) through wi-fi with your router and use it in the network. I planned to use it with my old printer hidden in the wardrobe 🙂
How to set up a vonets WiFi repeater?
1. you can buy your vonets from ebay or from other source. 2. Connect the vonets wifi repeater into your USB port in your windows computer 3. Give it about 1 or 2 minutes to boot up. You will see light flashing. When you see this, press and hold the reset button for about 10 seconds.
How to connect the vap11g to the device?
There are 2 ways to feed the VAP11G directly connecting it to a USB port or using a DC ADAPTER should not exceed 15V. In this way we can power the device itself, Ip camera, receiver, etc We only have to install the software on a PC or Laptop to connect the set and finally VAP11G RJ45 cable to the device.
Can vap11g WiFi bridge be used with IP camera?
Thanks for choosing VAP11G WiFi Bridge. With this portable device, IP Camera and other IT products with Ethernet RJ45 port can access wireless network easily. Two kinds of application topology of VAP11G are shown as below. Correct Power Adapter Polarity