Table of Contents
How does a Synchrometer work?
First, the Synchrometer. This is a device that measures air flow down through the throat of the carb. That’s all it does, but having that ability allows you to balance all four cylinders so that they’re all working the same amount. Balance is important, otherwise the engine will run roughly, especially at idle.
How do you use a uni Syn?
Warm Engine To Normal Operating Temperatures. Remove Air Cleaner; Disconnect Linkage. Place UNI-SYNC Over Throat Of One Carburetor. With Adjusting Screw (A) In Open Position, Gradually Turn Down Until Float (B) In Tube (C) Rises To, Or Near, Any Graduating Mark.
What does a synchrometer flow meter measure?
General Information: Synchrometer Flow Meter is designed to measure the air flow on the air intake of the carburetor. The indication is more sensitive on the lower side of the scale to ensure most precise adjustment at idle and low R.P.M. Type BK futures a rubber sleeve that can be rotated to open a by- pass to allow a higher air flow.
How much air can the synchrometer bk sk measure?
It is rated at up to 30 Kilograms of air per hour. Should you require an airflow meter that can handle even larger volumes of air, then we recommend you its larger brother, the Synchrometer BK SK Synchrometer airflow meter for various carburetors.
What is the best airflow meter for carburetors?
Should you require an airflow meter that can handle even larger volumes of air, then we recommend you its larger brother, the Synchrometer BK SK Synchrometer airflow meter for various carburetors. Pushed into the trumpet / ram pipe / velocity stack or throat, it will measure and indicate the airflow to enable you to balance multiple carburettors.
What is a carburettor synchrometer used for?
This synchrometer can be used for balancing multi-barrel carburettors and fits multiple automotive vehicles. This precision measuring tool accurately indicates the amount of air flowing through the carburettor, allowing engine speed adjustments to the carburettor more easily.