Table of Contents
How many HP is an Intex pump?
Pump motor: 0.6 HP.
What sand should I use in my Intex pool filter?
The recommended type is No. 20 grade silica sand, with specification of 0.45 to 0.85mm (0.018 to 0.033 inches) with a Uniformity Coefficient less than 1.75. Too fine of a grade of sand will clog too quickly, and too soft of a sand will break up and also cause clogging.
How many HP is Intex sand filter pump?
0.75 HP
Pump motor: 0.75 HP. Turnover rate: 2,450 GPH (9.2 m3/hr) Minimum pool size (water capacity): 5,500 gal (20.8m3)
What HP is a 1500 gph pump?
2.5 HP 1500 GPH Pool Filter Pump with Timer and Swimming Pool Maintenance Kit.
Can I upgrade my Intex pool pump?
An easy way to upgrade your Easy Set pool filter is to just buy a larger Intex Filter System to increase the water volume per hour. However, they all have the same filter size except for the 2,500 GPM unit, which uses a larger filter cartridge. To upgrade even further, look at the Intex sand filter systems.
How often should sand be replaced in pool filter?
every 3-5 years
On average, sand should be replaced every 3-5 years. This may be longer if the pool stays clear, or shorter, if the filter runs all the time. The jagged edges of the sand wear down and become smooth as the sand ages.
Do you still need chlorine with sand filter?
Sand filters need chlorine to sanitize the water. The sand is used to remove debris from the swimming pool, while chlorine is added to get rid of bacteria. Chlorine is a sanitizer; Sand is a filter. Your pool needs both of them to function properly.
Can I put Clorox in my inflatable pool?
Follow the manufacturer’s instructions for filtering and disinfecting these types of pools to prevent the spread of germs and protect everyone’s health. It is NOT safe to add disinfectant to water in small inflatable or plastic kiddie pools and water slides.
Can you use a different pump for Intex pool?
Installing a New Intex Pool Filter System All you need to do is swap hoses from the old system to the new one, prime the pump, and plug it in! However, if you replace with a sand filter, you’ll also need some filter sand. Or, if using a diatomaceous earth filter, you’ll also need some DE powder.