Table of Contents
How many quarts of oil does a 2008 Harley Davidson Sportster take?
Although capacity of the engine is 3.5 quarts, you only use 3 quarts when replacing oil.
What oil does a 2008 Sportster take?
The Evolution Sportsters have wet clutch and primary drives. It is recommended to change the oil at 1,000 miles, then every 10,000 miles after that. The manufacturer recommends using 20w50 oil. Make sure that the oil you use is approved for wet clutches.
What oil does a 883 Sportster take?
For Sportster 883cc and 1200cc motorcycles, the AMSOIL Synthetic 20W-50 Motorcycle Oil is recommended for both the engine and transmission. Older Shovelheads, Panheads and Flatheads the recommendation is to use AMSOIL SAE 60 Synthetic oil for optimum performance and protection.
Where is the oil drain plug on a 1200 Sportster?
Unlike most vehicles, the Harley Sportster Evolution Engine has an oil drain tube, not a plug. This tube is attached by a house clamp to a nipple welded to the frame. Loosen the house clamp with a Flathead Screwdriver.
What kind of oil does a 2008 Harley Sportster 1200 take?
AMSOIL synthetic lubricants are the solution for riders who want the most from their 2008 Harley-Davidson XL1200C Sportster Custom. They resist the devastating effects of extreme heat, even in rally or parade traffic on hot days.
What kind of oil does a 1200 Sportster take?
20w50 oil
Sportsters require a little over three quarts of 20w50 oil.
What weight oil should I use in my Harley?
According to Harley Davidson, you can use 20W-50 synthetic oil in almost all weather conditions. The best practice is to use it in the regions where the ambient temperature fluctuates between 60 and 80-degrees Fahrenheit.
What oil should I run in my Harley?
AMSOIL Offers Superior Protection And Performance
| AMSOIL Recommendations for Harley-Davidson Motorcycles | ||
|---|---|---|
| Flathead | Best | Secondary |
| Engine | 20W-50 | — |
| Transmission | 20W-50 | MVT Synthetic V-Twin Transmission Fluid |
| Primary Chain Case | 20W-50 | MVP Synthetic V-Twin Primary Fluid |
How many quarts does a Sportster take?
Sportsters require a little over three quarts of 20w50 oil. 13 Replace the filler cap of the oil tank.
What kind of oil does a Harley Sportster use?
What is the best oil to use in a Harley?
Ans: For all weather conditions, Harley Davidson recommends SAE 20W50 synthetic oils the Twin Cam engine. But if you live in a region where it gets below 40F, you should get something that maintains SAE 10W40 standards. Similarly, SAE 60 H-D is suggested for higher temperatures above 80 degrees.
How often should you change oil in Harley Sportster?
While some may recommend having different intervals for all 3 components, we like to change the oil in all 3 every time we do a change, which is typically every 3000-4000 miles. Consult your owner’s manual for recommended numbers, but the fresher you keep the oil, the better the bike will run.
Can I use regular motor oil in my Harley?
Our answer: You can safely drain the synthetic oil and go back to conventional oil (but read all the way down before you do). There will not be any problems whatsoever. Synthetic and conventional oil can be substituted back and forth without any compatibly issues or mechanical risks.
How much oil does a Sportster need?
three quarts
Can you change the engine oil on a Harley Davidson Sportster?
Don’t be scared to do some basic maintenance on your own Harley, such as changing the engine oil. This article applies to the Harley Davidson Sportster. Many new Harley owners, especially those who are new to riding a bike altogether, sometimes feel apprehensive about working on their rides. Don’t be shy! Get in there and start tinkering.
What kind of oil do you put in a Sportster?
The entire oil change process is easy and can be done with only basic tools and without even needing to use a torque wrench. 20W50 semi-synthetic motorcycle oil. You may prefer 20w-50 full synthetic motorcycle oil if you live in hotter climates or ride your Sportster aggressively. Quantity: 2.9 quarts (2.7 litres).
How do I change the oil filter on my motorbike?
Turn the oil filter counterclockwise and remove. Replace the drain plug and be sure to tighten the hose clamp sufficiently, so that the plug does not vibrate back out when you are riding. Figure 6. Reinstall the drain plug and make sure to tighten the hose clamp back down. There are a few steps to take before installing your new oil filter.
How long does it take to change the oil on a motorcycle?
This job will take you less than an hour in your own garage for just the cost of new oil as well as a filter without paying an arm and a leg in labor work. It helps to have a warmed up bike to work on in order to make the oil flow much faster, making it a cleaner replacement.