Table of Contents
What is hairline finish in stainless steel?
The hairline finish is a design finish in which the surface of the metal has a straight line of hair, like the straight hair of a long woman. This hairline finish is a general-purpose design finish that has been used for a long time. The standard stainless steel hairline finish on the market is #180 to #240.
What is 2B stainless steel?
2B is the term used by the ASTM A480 standard to define “a smooth, moderately reflective cold-rolled annealed and pickled or descaled finish typically produced by imparting a final light cold-rolled pass using polished rolls.” It is the most widely-used stainless steel finish available today.
Can stainless steel be matte finish?
2B Matte finishes are the least expensive of the stainless steel finishing options. The finish is produced by ‘cold rolling’ stainless steel through special rolls or dies. The cold rolling produces a smoother, less pitted surface.
What is 4B stainless steel?
4B Finish Stainless Steel Sheet 4B is produced with short, parallel polishing lines. These lines extend uniformly along the length of the sheet. It is obtained by mechanically polishing with gradually finer abrasives. Depending on requirements, the final finish can be between 120 to 320 grit.
Is there a matte stainless steel?
The Illusion of Matte Although matte black stainless steel is stainless steel, that doesn’t mean it’s shiny. This nonglossy finish helps create the gorgeous matte surface that defends your appliances from dirty smears and keeps them looking pristine.
What is Matt stainless steel?
2B Matte finishes are the least expensive of the stainless steel finishing options. The finish is produced by ‘cold rolling’ stainless steel through special rolls or dies. The cold rolling produces a smoother, less pitted surface. Next it is softened and de-scaled in acid solution.
Is satin stainless steel the same as brushed?
To some, satin is the same as a brushed finish. To others, it means a translucent, frosted,“milky” look. Satin finishes can be obtained with metal brushing, or they can be scratched with sandpaper or other abrasive material rather than with a metal brush. A brushing technique results in a long stroke pattern.