Where are Englander pellet stoves manufactured?

Where are Englander pellet stoves manufactured?

Built Here England’s Stove Works was started in 1976 by Bob England and his son Ron, literally in their own backyard. Today, ESW is still family owned, and still in the England’s “backyard” of Monroe, VA. We’ve proudly grown to supply stoves (and now grills and lifestyle products) throughout the U.S.A. and Canada.

How do I adjust my Englander pellet stove?

To increase the low air burn number press the up arrow buttons below the heat range and blower speed. You must press both of the up arrow buttons at the same time to adjust the number. Press the down arrows at the same time to decrease the number.

How much does a Englander pellet stove weigh?

261 lbs.
Weight: 261 lbs. Flue size: 3″ (rear exhaust)

Why does my England pellet stove keep shutting off?

If your flame is weak, or “lazy”, you’re not getting the heat you need and your stove might shut down. This problem is most likely caused by a bad or weak blower exhaust, poor air adjustments, or an uncleaned/neglected pellet stove.

How many years does a pellet stove last?

10 years
Common Issues. A properly installed and maintained pellet stove should last at least 10 years. Some have track records of more than 20 years, but most owners believe that stoves last as long as they can get parts.

How do I maximize my pellet stove heat?

5 Ways To Get More Heat From A Pellet Stove

  1. Burn high quality pellets low in ash and moisture content.
  2. Increase the heat output setting on the stove.
  3. Increase the blower speed on the stove.
  4. Adjust the airflow in and out of the stove.
  5. Clean the stove regularly in line with the manufacturer’s guidelines.

What are pellet stoves made of?

Wood pellets are made from the sawdust and shavings from wood furniture. Heats up to 1,500 sq. ft. to ensure a warm, cozy living space – perfect for moderately-sized homes EPA latest certification means High Efficiency and Low Emissions – you’ll use less fuel for the same amount of heat as older, non-certified stoves

What size pellet pipe do I need for a pellet stove?

The pellet pipe is designed to disassemble for cleaning and should be checked several times during the burning season — pellet vent pipe is not furnished with the unit and must be purchased separately. For installations over 4000 ft. above sea level the exhaust should be vented with 4″pellet vent pipe (AC-3100 kit, AC-33100 if Canada).

Can a pellet heater be used as an only source of heat?

NOTE: WE DO NOT RECOMMEND PELLET STOVES AS YOUR ONLY SOURCE OF HEAT. CAUTION: Please read this entire manual before installation and use of this pellet fuel burning room heater. Keep children, furniture, fixtures, and all combustible materials away from any heating appliance.

Can you put a pellet stove in a mobile home?

These freestanding pellet units are approved for mobile home or doublewide installation with outside combustion air hook-up. See “Flue System” section of manual. Mobile home installation should be in accordance with the Manufactured Home and Safety Standard (HUD), CFR 3280, Part 24.