Table of Contents
How do I reset my glucose monitor?
Press and hold the M (Memory) button for 7 seconds to restore the glucometer’s factory settings. Restoring factory settings: Restores the date by default (01/01/2017). Remember to reconnect the glucometer before taking new offline measurements.
What is the normal blood glucose level?
A blood sugar level less than 140 mg/dL (7.8 mmol/L) is normal. A reading of more than 200 mg/dL (11.1 mmol/L) after two hours indicates diabetes. A reading between 140 and 199 mg/dL (7.8 mmol/L and 11.0 mmol/L) indicates prediabetes.
What is the code for blood sugar test?
Table 1: HCPCS/CPT Codes and Descriptors
| HCPCS/CPT Codes | Code Descriptors |
|---|---|
| 82947 | Glucose; quantitative, blood (except reagent strip) |
| 82950 | Glucose; post glucose dose (includes glucose) |
| 82951 | Glucose Tolerance Test (GTT); three specimens (includes glucose) |
| 83036 | Hemoglobin A1C |
When should the code on glucose be compared to the code on the glucometer?
The code on glucose cuvettes or strips is compared to the code on a glucose meter when? The patient is tested. A phlebotomist working in a fertility clinic draws blood from a patient who also must submit a semen sample.
How do I know if my blood glucose meter is correct?
Check your blood sugar level with your meter at the same time that blood is drawn for lab tests, being sure to use a fingerstick sample, not blood from the blood draw. Then compare your meter’s reading with the lab results. Results that are within 15% of the lab reading are considered accurate.
How do I know if my blood glucose monitor is working properly?
You should test the solution as you would test your blood. After the monitor has determined the amount of glucose in the solution, you should compare it to the amount printed on the solution bottle. If the two numbers are the same, you know your glucose monitor kit is functioning properly.
What is a good blood sugar level for a type 2 diabetes?
A normal fasting blood sugar level is less than 100 mg/dL (5.6 mmol/L). Hemoglobin A1C test – The “A1C” blood test measures your average blood sugar level over the past two to three months. Normal values for A1C are 4 to 5.6 percent.
How do I reset my Accu Chek glucometer?
To reset the meter, remove the battery, press any meter button, then reinsert the battery.
What is the code for blood glucose monitor?
A. Yes, providers should continue to use CPT code 95251 for the analysis and interpretation of continuous glucose monitor (CGM) data. CPT code 95250 is used for the initial training and set-up of the CGM.