What is jet fuel type A?
Jet fuel (Jet A-1 type aviation fuel, also called JP-1A) is used globally in the turbine engines (jet engines, turboprops) in civil aviation. This is a carefully refined, light petroleum. The fuel type is kerosene. Jet A-1 has a flash point higher than 38°C and a freezing point of -47°C.
What is Jet A fuel made of?
crude oil
Jet fuels are primarily derived from crude oil, the common name for liquid petroleum. These jet fuels can be referred to as petroleum-derived jet fuels. Jet fuels can also originate from an organic material found in shale, called kerogen or petroleum solids: that can be converted by heat to shale oil.
What octane is Jet A1?
The octane rating of jet fuel is much lower, around 15 – this is much more like automotive diesel and thus much more resistant to detonating due to sparks or compression.
What is the specification for Jet-A?
Jet A-1 manufactured to Def. Stan. 91-091 has a higher max limit for acidity and additional requirement for lubricity….Properties and Specifications.
Jet A | Jet A-1 | |
---|---|---|
Flash Point, ºC | 38 Min. | 38 Min. |
Density @ 15ºC, kg/m3 | 775 to 840 | 775 to 840 |
Freeze Point, ºC | -40 Max | -47 Max |
Viscosity @ -20ºC, mm/s | 8.0 Max. | 8.0 Max. |
Is Jet A the same as diesel?
There are still some big differences between diesel and Jet-A. For starters, there’s a higher level of sulfur and other additives-including cetane, and the cetane number-in Jet-A than is allowed in your diesel. This could lead to fines and may even damage your engine.
What is the difference between Jet A1 and kerosene?
Kerosene is a light refined product (C6-C16) that has a lower boiling point range than diesel/No. 2 fuel oils. Jet-A (freeze point of -40°C) and Jet-A1 (freeze point of -47°C) are highly refined kerosene-type fuels used in commercial and general aviation turbine engines.
Does Jet A1 have icing inhibitor?
“Prist is a trade name for an aviation fuel system icing inhibitor, diethylene glycol monomethyl ether. This is an approved additive, which may be added to jet fuel—Jet A, A-1, B—to prevent free water from forming ice and potentially blocking engine filters,” Clarke said.
Can you run Jet A1 in a diesel engine?
Yes, you can, but long term use will cause damage to your engine. JET-A1 is lacking a lot of the lubricating properties diesel has, and over time, this results in increased wear.
Can I run Jet-A in a diesel engine?
Can you mix diesel and Jet-A?
For starters, there’s a higher level of sulfur and other additives-including cetane, and the cetane number-in Jet-A than is allowed in your diesel. This could lead to fines and may even damage your engine.
Can you mix Jet A and diesel?
Can you burn Jet-A in a kerosene heater?
In addition, never use diesel, jet “A” fuel, No. 1 fuel oil, No. 2 fuel oil or gasoline in your heater. The use of any of these fuels could result in a fire or explosion that could cause death or injury.