Table of Contents
What size is a #8 fender washer?
#8 x 0.750″ OD 316 Stainless Steel Fender Washer.
What sizes do fender washers come in?
Extra Heavy Fender Washers
| Bolt Size | Outside Diameter | Thickness |
|---|---|---|
| 1/4″ Very Small | 1.000 | .108/.132 |
| 1/4″ Very Small O.S. | 1.125 | .108/.132 |
| 1/4″ Small | 1.250 | .108/.132 |
| 5/16″ Small | 1.250 | .108/.132 |
How thick is a fender washer?
Extra Thick Fender Washers are significantly thicker than a standard Fender Washer (For Example a 1/4″ x 1-1/4″ Standard is 0.050 inches thick, whereas an Extra Thick is Max 0.125 – Min 0.100 inches).
What size is a #10 fender washer?
Product Overview This washer has an 0.219 inch inside diameter, 0.75 inch outside diameter, and 0.062 inch thickness.
Will fender washers rust?
No rust stains. Fender washers you can trust to prevent pull through. Our washers offer a wide, flat bearing surface that distributes the weight ensuring a secure hold. Fender washers have a larger outside diameter compared to standard washers.
What are fender washers made of?
Fender Washers 18-8 Stainless Steel You’ll find in our inventory basic fender washers, as well as stainless steel and zinc-plated options. These stainless-steel and zinc-plated options help to ensure your fender washers perform durably over the long-term while fighting against corrosion.
How thick is a flat washer?
Standard Round Washers in 304 Stainless Steel
| Flat Washer Sizes | Inner Diameter (ID) | Washer Thickness |
|---|---|---|
| 1″ | 1.062″ | 0.125″ |
| 1-1/8″ | 1.187″ | 0.125″ |
| 1-1/4″ | 1.312″ | 0.125″ |
| 1-3/8″ | 1.500″ | 0.140″ |
Is a fender washer a flat washer?
Fender Washer: Description: Named for their common use on car fenders, fender washers are flat washers with a small hole and comparatively large outside diameter. Application: Used to distribute force over a large surface area—usually thin metal.
Are fender washers stainless?
【High Quality Stainless】These fender washers are 100% 18-8 (304) Stainless Steel which is one of the highest forms of corrosion resistant metals, making it last longer than other hardware on the market today.
Will zinc fender washers rust?
Zinc-plated fender washers have moderate corrosion resistance and tend to be more cost-effective than their stainless steel counterparts, making them ideal for use in projects that don’t require a high protection against corrosion.
What is the difference between form A and form B washers?
Type A is a series of steel washers at broad tolerances, where precision is not critical. Type B is a series of flat washers with tighter tolerances where outside diameters are categorized as “narrow”, “regular” or “wide” for specific bolt sizes. “Type” is not to be confused with “form” (but often is).
Are fender washers rust proof?
What is a #8 washer?
Flat Washers are used to increase the surface area of fasteners, in order to evenly distribute the force applied when tightening them to a surface. They are also used to prevent loosening due to vibration, to stop the bolt or screw from pulling through, and act as spacers.
How do I know what size my flat washer is?
Washer sizes correspond to the screw/bolt diameter they fit. For example, a 1/2” washer fits a 1/2” bolt, and therefore has an inner diameter of just over 1/2”.
What is a fender washer?
A fender washer is a flat washer with a larger outer diameter in proportion to its center hole. They are made from a thinner gauge metal than most flat washers and are designed to spread the load on thin sheet metal. Interestingly, they are named after their use on automobile fenders.
What is Form G washers?
Form G washers have an outer diameter of three times the nominal diameter, making them the largest metric flat washer form. They are ideal for use with soft materials such as wood and plastic.
What size washer do I need for my fender washer?
Fender washers, Stainless steel 18-8. Washer size (Diameter) is the size bolt that the washer is used with. Thus a 1/4″ washer fits a 1/4″ bolt.
What is a fender washer used for?
Fender washers help to evenly distribute the load between mechanical pieces like thin sheet metals. This will help prevent nuts, screws and bolts from pulling through or wearing down on the metal object. Parts come in various sizes, from the standard 1/4 fender washer and up.
What does 1/4 washer size mean?
Washer size (Diameter) is the size bolt that the washer is used with. Thus a 1/4″ washer fits a 1/4″ bolt. 4 This item is a semi-standard size and is therefore more expensive.