Table of Contents
Is Code alarm any good?
The alarm itself works flawlessly. It is compact in size, cleanly designed, well throughout for install, and the keyfobs are nice and ergonomically designed for your hand and pocket. Will recommend to everyone i know to go to Crutchfield and buy the Code Alarm CA1055!
How do you use a code alarm?
Operating on the Code Alarm CA4053 Remote Start System
- To start the vehicle, press and release the button 2 times within 2 seconds.
- When you arrive at the vehicle, turn the ignition key to the ON position (Do not try to restart the vehicle), then step on the brake pedal to disengage the remote start.
How do I disarm a code alarm?
To disarm the system, press and release the DISARM button. The siren will chirp and the parking lights will flash once, and the doors will unlock (if equipped and connected). The courtesy light will turn on for 1 minute, or until the vehicle is started.
How Do You Use Code Alarm Remote Start catx1b?
Register Product
- Turn the ignition ON.
- Press and hold the valet/override button.
- Within 10 seconds the system will chirp (3) three times.
- Press 1 button of each transmitter you wish to program.
- The system will respond with 1 light flash for each accepted transmitter.
How do I set the time on my Code Alarm Remote?
Adjusting the Clock and Timer Settings: The clock, alarm clock and programmable countdown timer are accessed through the Function Menu. Press and hold F for 3 seconds to access the function menu, once you have accessed the feature menu press and release F to scroll through each feature.
What is the valet override button on Code Alarm?
The valet button or switch permits the owner to temporarily bypass the alarm functionality of the system. To enter or exit valet mode, disarm the system with a working transmitter, your personalized manual override code, or using the procedure below which is to enter or exit valet mode.
What is the valet override button on Code alarm?
How do I turn off valet mode on Code alarm?
Press and release the valet/programming button 3 times. The system will respond with 1 chirp for ON or 2 chirps for OFF.