What type of Mic is a Coles 4038?
4038 Studio Ribbon Microphone
The 4038 Studio Ribbon Microphone is of British Broadcasting design (BBC) and used for broadcasting and recording such sounds where a clear smooth wide range frequency response, absent of transient distortion and relatively high sensitivity is essential.
What is Coles 4038 good for?
The Coles 4038 ribbon microphone is used in some of the world’s best studios and is often the main choice for capturing drums and guitars due to its incredible response to their natural sounds.
Do Coles 4038 need phantom power?
NEVER PLUG THE 4038 INTO PHANTOM OR “T” POWERED MIC INPUTS. “T” POWER WILL INSTANTLY DESTROY A RIBBON (AND ALSO CAN HURT A DYNAMIC MIC). PHANTOM POWER CAN DO THE SAME IF YOU HAVE A BAD MIC CABLE. IT IS BEST TO PLAY IT SAFE BY TURNING OFF THE MIC POWERING AND WAIT A MINUTE.
Is phantom power bad for ribbon mics?
Intro. The ribbon elements in some vintage ribbon microphones can be harmed or even destroyed by the presence of phantom power. For this reason, it is commonly recommended that phantom power be turned off when using ribbon microphones. Leaving phantom power on can result in a stretched or completely blown ribbon.
Will phantom power damage a ribbon mic?
What is the frequency response of a 4038 mic?
The photo at right shows part of Steve Albini’s collection of 4038s. The mic’s frequency response is flat from 30 to 15,000 Hz. The ribbon maintains a uniform figure-of-eight polar response in both the horizontal and vertical planes. 4038s manufactured today are identical to those manufactured in 1974.
When was the Coles Electroacoustics 4038 Mic released?
The Coles Electroacoustics 4038 is also known as: 4038 Studio. The mic was released in 1961. Frequency Response – Bidirectional Click Graph to Compare!
What kind of magnet does the BBC 4038 use?
Despite advances made, for example, in magnet technology, the 4038 utilizes the same magnet initially spec’d by the BBC in the 1950s. The output connector is a Western Electric 4069; the mic can be ordered with a 4069-to-XLR adapter. The ribbon material is among the thinnest of any commercial ribbon mic, at 0.6 microns.
What is a 4038 used for?
It is used where a clear smooth wide range frequency response, absence of transient distortion and relatively high sensitivity is essential. The 4038 is a proven performer, and is in use around the world by broadcasting networks such as the BBC as well as top engineers and studios on hit recordings.