Table of Contents
How do I set the temperature on my Stelpro thermostat?
Set points can be adjusted by increments of 0.5°C (1°F). To quickly scroll through the set point values, press and hold down the button. The minimum set point is 3°C (37°F), and the maximum set point is 30°C (86°F). In Day mode, you can turn off the thermostat by lowering the set point below 3°C.
How do Stelpro heaters work?
It detects the ambient room temperature and modulates the heater’s power to the desired temperature or comfort level. The thermostat communicates to the heating unit the temperature setpoint to reach and at which to maintain the room temperature.
How do I unlock Stelpro?
The LOCK icon blinks on the thermostat display, meaning that it is possible to unlock the thermostat. 5. While the LOCK icon is blinking, simultaneously press down both buttons for more than 10 seconds, until the LOCK icon disappears.
Does a Stelpro thermostat have a battery?
You will never have to replace any batteries or worry about losing connection because of a weak battery. The Stelpro Ki is wired directly to the power source so it will never have the problems common with some of the other “power stealing” thermostats.
Why does my baseboard heater not turn off?
The Baseboard Heater Won’t Turn Off A baseboard heater that’s running nonstop is a sign of a faulty thermostat. A malfunctioning thermostat could increase your energy bills. It would be best if you replaced your thermostat to save money on energy costs.
Why is my electric baseboard heater not working?
Open the main panel door and look for a tripped breaker. If the heaters are on a 240-volt circuit, you may find a couple pair of breakers tripped. Reset the tripped breaker. If it trips again, there’s a problem with the electrical circuit — not the heater.
How does a non programmable thermostat work?
A non-programmable thermostat is your most basic option. This type of thermostat will allow you to turn on the heating or cooling system, set the temperature, and operate the system fan. Non-programmable thermostats may also be referred to as manual thermostats, as all adjustments must be made manually.
What is Eco mode in Stelpro thermostat?
The Stelpro® non-programmable electronic thermostat offers accurate temperature control and the ‘ Eco Mode ‘ permitting energy savings up to 12%. It features one-click setpoint lowering, quality sensors and advanced algorithms.
Why is my thermostat turning off?
A Tripped Safety Switch Sometimes, the issue is with your AC itself. Every AC has a safety switch installed in the drain pan that turns the system, thermostat included, completely off if it detects a hazardous problem. If the safety switch indicates a problem, contact an HVAC professional to inspect your AC.
What goes wrong with electric baseboard heaters?
The Baseboard Heater Produces a Burning Odor While Running Often, the smell is from burning lubricant or dust that has collected on the vents. Improper cleaning of your baseboard heater can damage the heater. If it’s an issue with something burning, the baseboard heater could be sending harmful chemicals into the air.
How long do electric baseboard heaters last?
about 15 to 25 years
Standard baseboard heaters normally serve their owners for about 15 to 25 years before wearing out and failing. The exact life expectancy rises and falls depending on several factors, such as quality, average outdoor temperatures, and thermostat settings. They tend to last longer in homes with multiple heat systems.
Should I replace my electric baseboard heaters?
You save money Replacing your electric baseboard heaters with things like heating ducts or radiant heating may be a significant up-front expense, but you could save as much as 50 percent on your energy bill during the winter months.
What’s the difference between programmable and non-programmable thermostat?
A programmable thermostat automatically sets back the temperature in your home based upon a predetermined schedule, while a non-programmable thermostat will stay at the same temperature 24 hours a day.
How do you lock a Stelpro thermostat?
From the Day mode, simultaneously press Page 8 INSSTE402NP0711 8 down the two buttons for more than 10 sec- onds, until the icon displays (note that the icon will also blink after 3 seconds); 3. Release the buttons. The thermostat is now locked.