How much does a ton of pea Stone cover?
Consult with the local supplier to find the density of the pea gravel product. In general, a ton, or 2,000 lbs., will cover 100 square feet at a 2-inch depth.
How much does it cost to put stones in a driveway?
What is the average cost of a gravel driveway? The average cost to install a gravel driveway is between $1.25 and $1.80 per square foot. The cost of a 16- by 38-foot driveway is around $1,500. Gravel driveway costs can run the gamut from $300 on the low end to up to $60,000 for a very long driveway.
What is the least expensive driveway?
Gravel is typically the least expensive driveway option. Concrete and asphalt both require a gravel base prior to installation, and require that the homeowner purchase enough gravel and additional material to cover the area if such a base is not already in place.
How do you build a pea gravel driveway?
Generally, you work the soil about 6 inches deep, remove any weeds, lay down 2 inches of coarsely textured base rock (also called crushed rock), and cover that with a 3-inch-deep layer of pea gravel. The base rock stabilizes the pea gravel to provide a firm surface.
How thick should pea gravel be?
between 2 and 2.5 inches
How deep should pea gravel layers be? — Typically, each layer of gravel should be between 2 and 2.5 inches.
How thick should a pea gravel driveway be?
The ideal thickness of each layer is between 4 to 6 inches. The middle layer should also be angular stones about 2” to 3” in diameter such as our #2 Bluestone. Since the material is angular it locks together providing traction and a stable foundation.
What do you put under pea gravel?
What do you put under pea gravel? Landscaping fabric and sand or crushed rock (or both) are most common. You can also use a honeycomb grid for extra stability.
How do you stabilize pea gravel?
The two most effective methods for stabilizing pea gravel are cement and permeable pavers. If you’re stabilizing pea gravel with cement, it will hold for a while until it’s eventually damaged by traffic and water exposure.
How much does a pea gravel driveway cost?
Pea gravel driveway. A pea gravel driveway costs $28 to $45 per ton, $29 to $86 per cubic yard, or $1 to $3 per cubic foot for materials. Most pea gravel mixtures have a blend of stones in three or four colors. Pea gravel slides around and requires edging or pavers on the sides of the driveway. Avoid using pea gravel for a driveway on an incline.
How much does a stone driveway cost?
To construct a loose stone driveway, you need more than just the top layer of gravel. There‘s the sub-base too. A typical 40m2 gravel drive costs a total of about £2450. Or, gravel driveway costs per m2 of about £60. This average cost depends on the type of gravel and whereabouts you live in the country.
Is pea gravel good for a driveway?
Pea gravel is made up of small, smooth rounded stones that can be used on any walking surface and on driveways. The stone’s brown and white color gives it a natural look that’s attractive with any landscaping. Pea gravel is much cheaper and more environmentally friendly to install than concrete or asphalt.
How to install a pea gravel driveway?
Excavate the area to a depth of 5–6 inches before pouring pea gravel.