How do I fix the error Code LC on My Samsung dishwasher?
When the LC code is flashing on your Samsung dishwasher it indicates the unit’s leak sensor is detecting moisture or a water leak. If you’d like to simply clear the code it’s as simple as unplugging the power cord to the dishwater for about 15 minutes. Doing this should clear the error and reset your dishwasher.
What is the meaning of LC In dishwasher?
Leakage error
Leakage error The LC or LE error code appears when the dishwasher’s leak sensor detects moisture or the water reflector is blocked (Waterwall models only). When this code occurs, the dishwasher will turn itself on and will not turn off.
What does 5C mean on Samsung dishwasher?
Drain error 5C, SC, 5E, SE – The dishwasher can’t drain. Inspect the dishwasher’s drain connection at the sink. Check the drain hose. Run water in the sink that the dishwasher is connected to. Clean the drain, filter, and sump in the tub.
What does Oc stand for on a Samsung dishwasher?
OC or oE: There is a water level error, usually indicating too much water in the dishwasher. Check the drain hose, its sink connection and the dishwasher filter and drain. Run water in the sink to dispel any clogs.
What is LC error in Samsung washer?
Samsung Washing Machine Error Codes 1E, LE, 1C, LC, LC1, 1 1C, 1 LC – Water level sensor failure or water hose connected to the sensor being detached from the drum because of vibration or water hose clogged with some gunk and sensor unable to measure how much water left in the drum.
Why is my LG dishwasher flashing CL?
Child Lock Feature Activated It simply means you (or someone in the household) has activated the child local feature on the dishwasher. You can release this feature by: Pressing down the wash and rinse buttons simultaneously. Hold both for at least five seconds.
How do I fix my Samsung Washer error 5C?
The most common reason for this error is a blocked filter or a kinked drain hose. You should also check that the drain hose has been installed properly and clean the hose thoroughly to remove any blockages that may be preventing your washing machine from draining properly.
How do you clear the LC code on a Samsung washer?
The LC flashing on your Samsung dishwasher indicates that the dishwasher’s leak sensor has detected a water leak or moisture. Simply turn off the dishwasher for 15 minutes to clear the error code LC. This should clear the error code and reset the dishwasher.
How do you clear E5 error on dishwasher?
- If your Dishwasher is displaying the “E5 Error Code”, this can indicate that there is excess water in the base of the unit, which has triggered the flood sensor.
- – Remove the Dishwasher out of the cavity.
- – Tilt the dishwasher backwards on an angle (with towels to soak moisture in place)
How do I reset the CL code on my LG washer?
CL Error Code CL is not an error code, but an indicator that the child lock feature is active. When the child lock feature is active, the control panel is disabled, and settings cannot be adjusted. To activate or de-activate child lock, press and hold the child lock button for 3 seconds.
How do I clear the error code on my LG dishwasher?
Reset the Dishwasher Occasionally, the AE error code can be caused by a control board glitch or a float sensor fault. In these circumstances, resetting the dishwasher by unplugging it for 10 minutes should resolve the error code.
What does 5E mean on a Samsung washer?
having draining issues
When your Samsung Washing Machine is displaying a 5E error code, it means that your washer is having draining issues. If you have a front load washer and would like to manually emergency drain it, please visit our page about ‘Emergency Drain a Samsung Front Loader. ‘
How do I reset my Samsung dishwasher without unplugging?
Is it possible for you to reset your dishwasher? Yes, you can reset your dishwasher by pushing and holding the Start/Reset button on the appliance for a few seconds and then pressing the button again.
What does flashing LC mean on Samsung washer?
A Samsung washer SC error code means that the washer has a drainage problem or, more specifically, the washer detects that the drain cycle is taking too long. The SC error code is similar to Samsung error codes Nd, 5E, SE, 5C, SC, and 1 5C, which also indicate a drainage problem.