What is ardex k15 used for?

What is ardex k15 used for?

ARDEX K 15 is used to level and smooth interior concrete, terrazzo, ceramic and quarry tile, epoxy coating systems, metal, wood substrates and non-water soluble adhesive residue on concrete prior to the installation of finished flooring – on, above or below grade.

How do you mix ardex k15?

For each bag, pour 2 quarts (1.9 L) of ARDEX E 25 and 6 quarts (5.7 L) of water into the ARDEX T-10 Mixing Drum, then add each bag of ARDEX K 15 powder while mixing with an ARDEX T-1 Paddle and a 1/2” heavy-duty drill (12 mm, min. 650 rpm). Mix thoroughly for approximately 2 to 3 minutes to obtain a lump-free mix.

How thick can ardex be poured?

ARDEX K 521™ is a pourable, polishable, self-leveling topping for fast-track resurfacing of indoor concrete. ARDEX K 521 can be installed from a minimum thickness of 3/8” (9 mm) up to a maximum thickness of 2” (5 cm).

Does ardex need a primer?

NON-POROUS SUBSTRATES: ARDEX FEATHER FINISH will bond to some non-porous substrates, such as burnished concrete, terrazzo, and ceramic and quarry tile, without the use of a primer.

Can ardex be used outside?

ARDEX K 301™ Exterior Self-Leveling Concrete Topping is a self-leveling topping and underlayment for fast-track resurfacing and smoothing for exterior and interior applications over concrete and approved, properly prepared, non-porous surfaces, including terrazzo, epoxy coatings and ceramic and quarry tile – on, above …

How thick can self leveling compound be?

It is suitable for use over underfloor heating systems to encapsulate them. It can be laid up to a thickness of 10mm.

Is self Levelling compound hard wearing?

It provides a wearing finish that can accept traffic, but it can be overlaid if desired. floor screed usually laid at 6mm, suitable for levelling, protective surfacing, resurfacing and repairs. It is extremely hard wearing and has excellent durability.

Is Henry feather finish the same as ardex?

The Henry Feather Finish is the same stuff as is in this Ardex bag. They are made by the exact same company -just different packaging.

Can you sand feather finish?

We applied two coats of the Feather Finish with ample drying time in between. After it’s completely dry and set (follow package directions), you’ll want to sand out any lines made with your knife. My husband held a Shop Vac in one hand and his palm sander in the other in order to minimize the dust.

What is the best concrete leveler?

1. Best Overall Self-Leveling Underlayment—Rapid Set CTS Concrete Leveler.
2. Best Self-Leveling Concrete for a Concrete Floor—Quikrete High-Performance Cement FastSet Self-Leveling Floor Resurfacer for Ceramic Tiles.
3. Best Self-Leveling Concrete for a Flat Surface—HENRY 565 FloorPro.

How hard is ardex?

High compressive strength, over 7,800 psi. Exceptional bond strength. Smooth existing concrete prior to installing vinyl and other floor coverings in critical areas. Easy to mix and apply.

What consistency should Feather Finish be?

Gradually add the feather finish concrete stirring until it is about the consistency of drywall mud or a thick frosting. If it gets too thick you can always add more water. It needs to be spreadable, but not too thin that it will not adhere to the edge of the countertop.

Can Ardex K15 be used on concrete?

ARDEX K 15 ® is the original and the most specified self-leveler in North America. Install over: interior concrete, terrazzo, ceramic and quarry tile, epoxy coating systems, wood, metal and non-water soluble adhesive residue on concrete; can be installed over concrete treated with certain curing compounds.

Where is ARDEX K 15 made?

ARDEX K 15®; Manufactured by ARDEX Engineered Cements: 400 Ardex Park Drive, Aliquippa, PA, 15001, USA, (724) 203-5000, www.ardexamericas.com i. Primer: 1. Standard Absorbent Concrete: ARDEX P 51™ Primer 2.

What is Ardex K15® self leveling underlayment?

ARDEX GUIDE SPECIFICATION ARDEX K 15® Premium Self-Leveling Underlayment A Self-Leveling Underlayment that Consists of a Blend of Portland Cements and Other Hydraulic Cements and Polymers for Interior Applications SECTION 03 54 16 HYDRAULIC CEMENT UNDERLAYMENT PART 1 – GENERAL

How do I download the ARDEX app?

For easy-to-use ARDEX Product Calculators and Product Information On the Go, download the ARDEX App at the iTunes Store or Google play. Refer to the technical data sheet at www.ardexamericas.com or call 888-512-7339 prior to installation.