Table of Contents
What is the maximum distance of a thinnet segment?
Thin Ethernet (ThinNet) (10BASE2) The maximum length of one segment is 185 metres.
What is the maximum cable length for thinnet coaxial cable?
Figure 8-5 Thinnet and BNC Connector Media and connector size—Medium. Maximum cable length—500 m (medium)
What is the distance limitation of 10BASE2 or thinnet?
10Base2 ThinNet segments cannot be longer than 185 meters, although it is often exaggerated to 200 meters, and you can’t put more than 30 devices on each populated segment. The entire cabling scheme, including all five segments, can’t be longer than 925 meters.
What is the maximum cable length for thinnet 10BASE2 coaxial cable?
185 meters
ThinNet uses BNC connectors attached to a thin coaxial cable. The maximum segment length of 10Base2 is 185 meters, and the maximum number of devices per segment is 30.
What is the difference between Thinnet and thicknet cable?
Thinnet, also known as Thinwire and Cheapernet, is 0.2 inches in diameter with the same impedance as Thickwire. Thicknet was the original Ethernet wiring, but Thinnet, which is cheaper and can be installed more easily, is the more commonly installed Ethernet wire. Thicknet continues to be used for backbone wiring.
What is the maximum length of cable segment in case of 10BASE5?
The name 10BASE5 is derived from several characteristics of the physical medium. The 10 refers to its transmission speed of 10 Mbit/s. The BASE is short for baseband signaling (as opposed to broadband), and the 5 stands for the maximum segment length of 500 meters (1,600 ft).
What is the maximum distance from satellite dish to receiver?
As for the distance it all depends on how you run your cable. Without an amplifier then anywhere between 45-100m depending on the installation and cable used.
What is the difference between thinnet and Thicknet cable?
What is thinnet coax?
Thinnet is the thin coaxial cabling used for 10Base2 installations of Ethernet networking. Thinnet cabling is RG-58 coaxial cabling that is 3/16 inch in diameter and has an impedance of 50 ohms. Thinnet uses BNC connectors to connect cable segments, computers, and concentrators (hubs).
What is the difference between Thinnet and Thicknet cable?
What is the maximum distance of cabling used on a 10BASE5 network?
10BASE5 uses a thick and stiff coaxial cable up to 500 meters (1,600 ft) in length.
What is Thinnet used for?
What is Thinnet coaxial cable?
What is thinnet coaxial cable?
What is the maximum length of 100BASE FX?
Table 1 shows the optical interface specifications for the 100BASE-FX standard….Product and Release Support.
| Parameter | 100BASE-FX |
|---|---|
| Maximum distance | 50/125 MMF cable: 1640 ft (500 m) 62.5/125 MMF cable: 6562 ft (2 km) |
Which is better thicknet or Thinnet and why?
Thicknet was the original Ethernet wiring, but Thinnet, which is cheaper and can be installed more easily, is the more commonly installed Ethernet wire. Thicknet continues to be used for backbone wiring. An alternative to Thinnet on an Ethernet network is twisted pair.
What is the maximum length of a thinnet cable?
Thinnet- maximum length of segment (terminator to terminator) is 185 meters (607 feet) Unshielded Twisted Pair (UTP) – maximum length of cable between hub and computer is 100 meters (328 feet)
What is thinnet and UTP?
Thinnet- maximum length of segment (terminator to terminator) is 185 meters (607 feet) Unshielded Twisted Pair (UTP) – maximum length of cable between hub and computer is 100 meters (328 feet) 3. What is a backbone? A backbone is a generic term used to describe media that interconnects a number of computers, segments or subnets.
What is thinnet and how does it work?
Thinnet uses BNC connectors to connect cable segments, computers, and concentrators (hubs). Many older hubs, bridges, routers, and other networking devices have at least one thinnet port for connecting to 10Base2 networks.
What is the difference between thicknet and thinnet coaxial?
Thicknet coaxial is thicker cable than thinnet. Thicknet cable is about ½ inch thick and can support data transfer over longer distances than thinnet. Thicknet has a maximum cable length of 500 meters and usually is used as a backbone to connect several smaller thinnet-based networks.