What is a Category 2 three-point hitch?
A Category 2 hitch increases the top link pin diameter to 1 inch and the lift arm pins to 1 1/8 inch. The spacing between the arms increases to approximately 32 inches.
What’s the difference between Category 1 and Category 2 3 point hitch?
Category 0 Hitch For tractors with up to 20 horsepower. Category 1 Hitch For tractors with 20 to 50 horsepower. Category 2 Hitch For tractors with 50 to 90 horsepower.
What is a Category 2 tractor?
Once you cross over 50 horsepower and you move up into utility tractors, you’re gonna move into Category 2. This is typically used on tractors between about 50 and 150 horsepower or so, although there are always gonna be some exceptions in those ranges.
What category hitch is tractor?
Size categories
| Category | Tractor power | Lower hitch spacing |
|---|---|---|
| 0 | Up to 20 hp (15 kW) | 20 in (510 mm) |
| 1 | 20 to 45 hp (15 to 34 kW) | 28 in (710 mm) |
| 2 | 40 to 100 hp (30 to 75 kW) | 34 in (860 mm) |
| 3 | 80 to 225 hp (60 to 168 kW) | 40 in (1,000 mm) |
What size are CAT 2 pins?
This is a category 2 top link pin. This pin has a usable length of 4-3/8″ and has an overall length of 6″.
What size is a Category 2 tractor pin?
| Category 2 | Category 4N | |
|---|---|---|
| Upper link pin diameter | 25.4 mm (1.00 in.) | 44.96 mm (1.77 in.) |
| Upper link hole diameter | 25.65 mm (1.01 in.) | 45.21 mm (1.78 in.) |
| Lower link pin diameter | 27.94 mm (1.10 in.) | 50.8 mm (2.00 in.) |
| Lower link hole diameter | 28.70 mm (1.13 in.) | 51.05 mm (2.01 in.) |
What size is Cat 2 3-point hitch?
Three-point hitch specifications
| Category | Hitch pin size | power |
|---|---|---|
| 1 | 19 mm (3/4″) | 15-35 kW (20-45 hp) |
| 2 | 25.5 mm (1″) | 30-75 kW (40-100 hp) |
| 3 | 31.75 mm (1 1/4″) | 60-168 kW (80-225 hp) |
| 4 | 45mm (1 3/4″) | 135-300 kW (180-400 hp) |
What is 3 point linkage for tractor?
Three point linkage (or three-point-hitch) is a standardised system to attach implements to tractors. They comprise of three movable arms assembled in a triangle or ‘A’ formation, and are controlled by the hydraulic system allowing lifting, lowering and tilting.
What size is Cat 2?
What are the 3-point hitch categories?
| Category | Tractor Power | Lift arm pin diameter |
|---|---|---|
| 1 | 20-45 HP | 7⁄8 in (22 mm) |
| 2 | 40-100 HP | 1 1⁄8 in (29 mm) |
| 3 | 80-225 HP | 1 7⁄16 in (37 mm) |
| 4 | More than 180 HP | 2 in (51 mm) |
Can I tow a camper with a Class 2 hitch?
This makes class 2 hitches an excellent choice for most passenger vehicles, including full-size sedans, minivans and crossover SUVs. They can be used to tow smaller size trailers such as single-axle utility trailers, small boat trailers, pop-up campers and some recreational vehicle trailers.
What diameter are CAT 2 pins?
| Category 2 | Category 3N | |
|---|---|---|
| Upper link pin diameter | 25.4 mm (1.00 in.) | 31.75 mm (1.25 in.) |
| Upper link hole diameter | 25.65 mm (1.01 in.) | 32.00 mm (1.26 in.) |
| Lower link pin diameter | 27.94 mm (1.10 in.) | 36.58 mm (1.44 in.) |
| Lower link hole diameter | 28.70 mm (1.13 in.) | 37.34 mm (1.47 in.) |