Table of Contents
Do you need a brick chimney for a wood stove?
If you live in a house without a chimney, you may be wondering whether it is possible to have a wood burning or pellet stove. Fortunately for many, the answer is a resounding yes! Luckily for those living in modern homes, you do not need a chimney to install a wood burning or pellet stove.
How high does a chimney need to be for a wood stove?
3 feet
A chimney must extend at least 3 feet above a flat roof and at least 2 feet above a roof ridge or any raised part of a roof within 10 feet. Sometimes getting enough vertical clearance to prevent eddy currents from affecting chimney draft is impossible. This may be because of unusual heights of nearby trees.
Do you need planning permission for a wood burner flue?
To get a wood burning stove installed in your home, the government states that you do not need to acquire planning permission from Building Control if these conditions are adhered to: The flue is situated at the rear or side of the building with a maximum clearance of 1m above the highest part of the roof.
What is the difference between a flue and chimney?
A chimney is a passage way for combustion byproducts to travel up that runs from a fireplace or stove up to the top of a house. It is usually made of stone or brick. Inside the chimney is a flue. In most cases, a chimney flue is made up of a steel chimney liner or ceramic chimney tiles.
How much does a masonry chimney cost?
A traditional masonry chimney can cost between $100 and $200 per linear foot to install. Engineered chimneys are slightly more affordable at a cost of $60 to $100 per linear foot. That means that the average cost for a 10′ chimney can range from $1,000 to $2,000 or $600 to $1,000, respectively.
How far above the roof does a stove pipe need to be?
In essence, any chimney, stove pipe or other heating exhaust vent should be 3 feet (1 meter) above the roofline or 2 feet (61 centimeters) above any part of the building in a 10-foot (3-meter) radius.
How far above the roof does a chimney have to be?
This rule means that your chimney’s shortest side needs to be at least 3 feet above the roof penetration, and its top has to be 2 feet higher than any part of the building that’s within 10 feet. There a number of reasons behind this rule.
Can you vent a wood stove out the side of a house?
For instance, wood-burning stoves will always be vented through the roof of your house, but pellet-burning stoves can be vented vertically through the roof, or horizontally through the wall to the outdoors. Same with gas stoves – venting can be routed in either direction – vertically or horizontally.