What is brick veneer construction?
Brick veneer is a method of construction where a property of either a wooden or steel frame is concealed with a single layer of bricks as the exterior layer. It offers the same look as double brick, however if the bricks were to be removed the structure of the house would still stand.
What are the benefits of brick veneer?
There are several advantages to using brick veneers:
- They are relatively easy and quick to install.
- They are not as heavy as other forms of masonry, which reduces structural loading.
- Cavities behind external brick veneers can aid insulation.
- They are durable and fire-resistant.
What is the thickness of brick veneer?
(13 to 25 mm) thick but can be as thick as 1¾ in. (45 mm). Thin brick shapes such as those depicted in Figure 9 allow the adhered veneer to be applied around corners, giving the appearance of traditional face brick facades.
What is veneer brick made of?
Masonry veneer walls consist of a single non-structural external layer of masonry, typically made of brick, stone or manufactured stone. Masonry veneer can have an air space behind it and is technically called “anchored veneer”. A masonry veneer attached directly to the backing is called “adhered veneer”.
What is the weight of brick veneer?
Standard 4 inch thick clay brick veneer weighs 39 pounds per square foot.
What is the thickness of a brick veneer wall?
Anchored brick veneer with wood stud backing typically consists of a nominal 3 or 4 in. (76 or 102 mm) thick exterior brick wythe attached to a wood frame with corrosion-resistant metal anchors and a prescribed air space between the veneer and the backing system, as shown in Figure 1.
How much does it cost to brick veneer a house?
Average cost: $7,500 – $22,500
| Brick Type | Cost per sq. ft. |
|---|---|
| Real Solid Brick | $9 – $20 |
| Brick Veneer | $5 – $12 |
| Stone Veneer | $12 – $17 |
What is the minimum clearance width of a brick veneer wall?
The clear width of a cavity between the masonry veneer and the exterior face of the supporting frame must be not less than 25 mm wide and where the masonry veneer is constructed on a slab-on-ground, the cavity must be drained to the outside in accordance with 3.3. 5.9.