Table of Contents
How do I connect my Genelec subwoofer?
Connect signal cables from your audio source to the female XLR “IN” connectors. Next, connect XLR cables from the corre- sponding “OUT” male XLR connectors to the input connector of each monitor. Connect the “LFE IN” connector to the LFE or . 1 output of a multichannel sound source.
How do I set up Genelec?
Place the listening setup symmetrically in the left-right direction. For typical two-way systems, the recommended height of the monitor acoustical axis is at the ear level, usually between 1.2 and 1.4 metres from the floor. Placing the monitors higher with a slight tilt will minimise floor reflections.
How good are Genelec speakers?
Genelec itself claims that all their speakers have the same sound image and sound quality. What separates the smallest and cheapest from the largest and most expensive is simply bass response and power. But we know that a more powerful hi-fi system often sounds bigger and more effortless even at lower noise levels.
Why are Genelec speakers so expensive?
There are plenty of flat responding, low distortion, insanely accurate monitors available. Genelec is expensive because it can be. They also use relatively outdated paper cones. Adam Audio, PMC, ATC, KRK and JBL are also very popular.
Why are Genelec speakers so good?
Genelec goes to great lengths to help you get the best sound in the room you actually have. They use all the tricks in the book: technology, topology, acoustic adaptation and education of their customers.
Does music sound better on studio monitors?
As a general rule, studio monitors are excellent for listening to music. They give a very accurate representation of the sound, revealing details that standard audio speakers can’t. Studio monitors can take some getting used to as they are designed for accuracy, rather than to enhance the sound.
Is the Genelec 8010 worth it?
Genelec monitors are not cheap and, considering the quality of design, components and sound, nor should they be. The quality of the 8010A is no exception and easily worth the price. If you are regularly on the move they will make a great investment, combining portability and durability equal to the calibre of sound.
How do I connect active speakers to my TV?
If your TV doesn’t use RCA connectors for audio output, it may have a headphone out port (3.5mm port). You can use this to connect your TV to the speakers. They’re the same connector used on phones, tablets, laptops, etc. For this, you’ll need to use a 3.5mm audio jack on the TV end and a RCA jack on the speaker end.
Where are Genelec speakers made?
Iisalmi, Finland
All Genelec products are manufactured at the company’s own factory in Iisalmi, Finland.
What replaced the Genelec 8040A studio monitor?
This product is replaced by model 8040B Studio Monitor The Genelec 8040A was in production between 2005 – 2013. The Genelec 8040A was in production between 2005 – 2013. It was replaced by the 8040B model.
How does the Genelec 1031A work?
The Genelec 1031A is a two-way active monitor system, consisting of a vented enclosure with a multiple amplifier unit set into the back. The amplifier unit contains a low signal level active crossover, two power amplifiers and overload protection for each driver.
Is the Genelec 8000 series too aggressive?
Some users may still find the Genelec sound too aggressive. The 8000 series builds on a very successful Genelec range, with all the major components redesigned for better performance while keeping the same family sound. 8040A active monitors, £1245.50 per pair; 7060A subwoofer, £1116.25 each; 7070A subwoofer, £1521.63 each.
What is the sensitivity of Genelec studio monitors?
The nominal analogue input sensitivity in Genelec studio monitors is -6 dBu which produces 100 dB SPL audio output at 1 meter in an anechoic room. The nominal digital input sensitivity is set so that a 0 dB FS digital input produces a theoretical 130 dB SPL sound level at 1 meter in an anechoic room.