Table of Contents
Is the LS2 intake better than LS1?
From 5,500 rpm to 6,500 rpm, the LS2 intake offered as much as 10 additional horsepower, but the LS1 unit actually produced an additional 2 lb-ft of peak torque (471 versus 469 lb-ft).”
How much horsepower does a Tbss intake add?
473 hp
Equipped with the TBSS intake, the power numbers increased to 473 hp at 6,800 rpm and 419 lb-ft at 5,300 rpm. The TBSS intake improved the power output from 4,500-7,000 rpm.
How much HP does a fast 102 intake add?
14-16 hp
The big 102mm intake showed us a gain of only 4 rwhp-it didn’t respond to the CNC-ported heads and bigger cam we previously tested. When tested on stock LS3/L92/L99 engines, it has shown average gains of 14-16 hp.
How many miles can a LS1 last?
The motor is good for 200+ With proper maintenance.
How much HP can a stock LS1 bottom end handle?
how much HP a stock LS1 engine can handle? Most people will tell you 500-550 rwhp is a reasonably safe limit to push a stock bottom end. The weak link is usually the pistons.
How much nitrous can a stock LS1 handle?
Re: How much nitrous in stock LS1? ( 100 dry shot, 150 wet.
What is a Tbss intake?
The Trailblazer SS (TBSS) intake is tall like the early truck manifolds but a little wider. The GM engineers did their homework on this intake as Holdener discovered. The TBSS will make more torque than the earlier truck intakes and yet will make more horsepower than the old LS6 intakes.
What is the horsepower of a Chevy LS1?
Equipped with the factory LS1 intake and Accufab 78mm throttle-body, the 6.0L produced peak numbers of 535 hp and 468 lb-ft of torque. This curve was to serve as the baseline for the remainder of the LS intakes.
What is the difference between an LS1 and LS6 intake?
First up was the LS6 intake. Designed as a factory upgrade for the LS1, the LS6 intake once again proved its reputation by significantly improving the power of our 6.0L. Compared to the LS1, the LS6 offered an additional 22 hp and 15 lb-ft of torque.
How much power does an LS motor make?
Our testing began with the LS intake that started it all, the LS1. Least powerful of all the factory offerings, the LS1 definitely limited the power output of our 6.0L test motor. Equipped with the factory LS1 intake and Accufab 78mm throttle-body, the 6.0L produced peak numbers of 535 hp and 468 lb-ft of torque.
Is there an absolute intake test for LS?
The first is that no intake test, including this LS extravaganza, is absolute. Intake manifolds are combination specific, meaning that the ideal intake for an 8,000-rpm stroker combination would be different than one designed for a stock 4.8L truck motor.