Table of Contents
What is D-STAR used for?
D-STAR (Digital Smart Technologies for Amateur Radio) is a digital voice and data protocol specification for amateur radio. The system was developed in the late 1990s by the Japan Amateur Radio League and uses minimum-shift keying in its packet-based standard.
What is D-STAR enabled?
D-STAR Gateways enable users to connect from a local D-STAR repeater, equipped with a D-STAR Gateway, to any other Gateway equipped D-STAR repeater. Once an Amateur is registered with a repeater gateway, it can connect to D-STAR users beyond the local repeaters.
What radios work with D-STAR?
D-STAR compatible radios are available for HF, VHF, UHF, and microwave amateur radio bands.
How can I listen to D-STAR?
We can access D-STAR through the following methods:
- Commercially available radios from Icom.
- Talk to the D-STAR network using a PC and the DVDongle.
- Modify many radios to talk D-STAR using the Icom D-STAR modules.
- Listen and decode D-STAR signals using a basic receiver.
- Interface with the gateway software.
What is D-STAR in Amateur Radio?
The D-STAR stands for Digital Smart Technologies for Amateur Radio. It is an open standard digital communication protocol established by JARL*.
What is a D STAR radio?
D-STAR. In addition to the over-the-air protocol, D-STAR also provides specifications for network connectivity, enabling D-STAR radios to be connected to the Internet or other networks, allowing streams of voice or packet data to be routed via amateur radio. D-STAR compatible radios are manufactured by Icom, Kenwood, and FlexRadio Systems.
What does D-STAR stand for?
Listening to D-STAR Digital Voice with DSD 1.7. D-STAR or (Digital Smart Technologies for Amateur Radio) is a Frequency Division Multiple Access (FDMA) Gaussian Minimum Shift Keying (GMSK) digital voice and data protocol used in amateur radio.
Is there a D-STAR decoder available?
Recently, this also includes D-Star. There are third-party decoders available, either for the protocol data and for the digital speech content, but legal conflicts with the patented AMBE vocoder may exist in some jurisdictions. Reception done by a Software Defined Radio and decoding of the D-Star header information done by the program dstar.exe.
Do I need A D-STAR radio to use ThumbDV?
Note that a D-STAR radio is required. The DVAP does not convert an analog FM signal to D-STAR. ThumbDV D-STAR DV USB is a USB device with the AMBE codec built in. Amateurs can use this with a personal computer’s audio system to communicate over the D-STAR network.