Table of Contents
What is girder coupler?
Girder Coupler is Fixed Type of Scaffold Beam Clamp. It Secures Scaffold Tube O.D 48.3mm (1-1/2″ or 1.9″) to Steel Structure I Beam, H Beam and C Beam. The Girder Coupler is used in Pairs in Construction, Especially Suspended Scaffolding System.
What are couplers used for in scaffolding?
2. Scaffold Couplers. Couplers are fittings that hold the tubes together. The most familiar are known as scaffold couplers and there are three basic types, which are Putlog Couplers, Right-angle Couplers and Swivel Couplers.
What clamps are used in scaffolding?
Scaffolding clamps are commonly used in most construction job sites. It is the type of structure that provides a temporary and safe work platform. It consists of steel tubes and clamps. It is generally called tube and coupler scaffold.
How much weight can a scaffold beam clamp hold?
Typical working load limit of 6.25kN against slip at tightening torque of 54 Nm. Joins scaffold tube having outside diameter of 48.3mm at any angle. Each half of the Coupler is interconnected with a swivel pin.
What is Swivel Coupler?
Pressed Steel Swivel Couplers are used to connect two scaffolding poles at any angle. Swivel couplers are used for adding diagonal bracing to a scaffold structure, and are adjustable to fit towers of any size.
How many types of scaffolding couplers are there?
three types
DIFFERENT TYPES OF COUPLERS: in the scaffolding couplers there contain three types of couplers which are: Right angle Coupler. In-line Coupler. Swivel Coupler.
Is a swivel coupler load bearing?
Swivel Couplers are load bearing fittings which connect two 48.3mm outside diameter scaffold tubes at any angle. These fittings are particularly used for façade, sectional or plan bracing.
What are the types of scaffolding couplers?
in the scaffolding couplers there contain three types of couplers which are:
- Right angle Coupler.
- In-line Coupler.
- Swivel Coupler.
What is Swivel Coupler in scaffold?
What is the load capacity of fixed coupler?
Swivel Coupler
| Finish Type | Electro Galvanised |
|---|---|
| Color | Golden Electro Plated (Yellow) |
| Brand | Test Certificate Available |
| Condition | New |
| Max Load Capacity | 2 Ton |
Can beam clamps be used vertically?
The clamps can support both horizontal and vertical loads. Beam clamps are easier and faster to install than welds or drill holes, which would require specialized labor and equipment, as well as engineering analysis.
What is a girder coupler used for?
Used to attach scaffold tube to steel girder beams the girder coupler is manufactured to quality standard AS 1576.1 and designed, engineered and manufactured to the highest standard. They are built with the best quality steel and are available fully zinc plated to protect against rust.
Can you rent scaffolding from United Rentals?
Whether your specialty is construction, electric, maintenance, masonry, or you need to rent scaffolding for painting, steam cleaning, or sand blasting, let United Rentals help you put together the scaffolding that’s just right for your job. When is climbing scaffolding cross-braces permitted?
Why choose versatile frame scaffolding?
Versatile frame scaffolding gives you the ability to reach just about anything. Whether your specialty is construction, electric, maintenance, masonry, or you need to rent scaffolding for painting, steam cleaning, or sand blasting, let United Rentals help you put together the scaffolding that’s just right for your job.
Is it safe to climb on scaffolding?
Climbing structural scaffolding cross-braces is unsafe and specifically forbidden by federal standards. If you are unable to directly access the scaffolding from another structure, you are required to follow ladder procedures to gain access. How much weight can a scaffold hold?