Table of Contents
How many Pawls does a shimano hub have?
SHIMANO has improved the rear hubs of its high end MTB group sets and wheels and equipped them with 18/16 notches and two sets of pawls to double the engagement and optimize traction.
How tight should wheel hubs be?
Expert Reply: The nut on the spindle should be tightened until snug, with no side-to-side play in the hub and then backed off slightly, about maybe a 1/8 of a turn.
How tight should my rear hub be?
You want your rear axle very tight. 150 in/lb is about standard. If it is not tight it will allow the rear wheel to move around and it ties your rear triangle together. Basically the whole back of the bike will feel sloppy.
How tight should a freehub be?
You can use a spanner or plumber pliers to turn it clockwise and stop tightening it after hearing 4 or 5 clicks. It just needs to be tight enough to hold your cassette and prevent it from coming loose.
How tight should hub cones be?
For quick-release type hubs, snug the cone down until it contacts the ball bearings, and turn back counter-clockwise one quarter turn (90 degrees). This will purposely make the bearing adjustment too loose. Hold cone with cone wrench and tighten locknut fully.
What makes Shimano rs81 rims so good?
As we’ve already suggested, the ride is right up our street. The broadly spaced hub flanges give ample lateral stability while the steel spokes and construction offers a rigid yet subtly comfortable ride. Brake performance is always a high point with Shimano rims, and the RS81s are no different.
What is an rs81 wheel?
Typically pitched as Ultegra-level, the RS81 is a ‘non-series’ wheel, meaning it’s of a similar quality but doesn’t carry the name.
What is the wheel size of the wh-rs81 rear wheel?
Rear Wheel WH-RS81-C35-CL-R 10/11-Speed Rear Wheel WH-RS81 -C35-CL-R10/11-Speed • Over Lock Nut Dimension: 130 mm (5-1/8″) Y49R98010Complete Quick Release 163 mm (6-13/32″) A B B
Are the rs81s any good?
If you’re looking for a top-quality, every-ride wheel or a budget race option, then the RS81s are good but you might also want to look at its stablemate, the C24, for a slightly lighter option.