Table of Contents
Are all Allison transmission filters the same?
The Allison 29539579 Spin-On Transmission Filter is not vehicle specific, but actually transmission specific. The Allison 29539579 Spin-On Transmission Filter will fit all Allison 1000, 2000, 2400 Series Transmissions. You must verify the transmission in your application to determine proper fitment.
How often should you change filter on Allison transmission?
Although GM recommends the Allison 1000 trans fluid and external filter be changed when the HD’s oil monitor says – or every 25,000 miles for HDs used in severe service – Rod Halsten, a GM master technician in Tuscaloosa, Alabama, says let the trans fluid color and smell be the fluid-change indicators.
Should I change internal filter on Allison transmission?
The internal filter should be changed every 75,000 to 100,000 miles.
What kind of transmission fluid does an Allison transmission take?
Allison Transmission TES 295® Approved Fluids are approved for use in Allison 1000 Series™, 2000 Series™, 3000 Series™, 4000 Series™ and H 40/50 EP™ on-highway products. Allison recommends that customers using TES 295® Approved Fluid consider Allison’s newest fluid spec, TES 668®, for their next service.
How many quarts of fluid does an Allison transmission hold?
Both the main and lube filters have identical part numbers and are commonly sold as a two-filter kit, complete with the necessary gaskets and O-rings. Allison 3000 transmissions can hold approximately 29 quarts of fluid; the larger Allison 4000 can hold approximately 48 quarts.
Can you use regular ATF in Allison transmission?
Automatic Transmission Fluid (ATF) – Can I use synthetic fluid? A. Any fluid that meets DEXRON III requirements is suitable for use in the Allison 1000 Series™. Always verify that the container reads DEXRON III, regardless of whether it is mineral-based or synthetic.
How many quarts of fluid does a Allison transmission hold?
Allison 3000 transmissions can hold approximately 29 quarts of fluid; the larger Allison 4000 can hold approximately 48 quarts. But not all of this fluid is in the transmission pan. Much is contained in the transmission cooler, cooler lines, and torque converter.
Can I use deXRon 3 in Allison transmission?
Dex III/TES-389 fluids are fine in the Allison, even 6 speeds, but you don’t get the extended drain intervals. For that, you need to step up to the TES-295 fluids.
Can I put deXRon VI in my Allison transmission?
deXRon®-Vi shall not be used in allison 500, 600 or 700 series transmissions (at, mt, ht, ht/V/Clt products). schedule one tes 389 and deXRon®-Vi fluids will have the same fluid change intervals as the current allison approved non-tes 295 fluid intervals.
How many quarts does a Allison transmission take?
Allison 3000 transmissions can hold approximately 29 quarts of fluid; the larger Allison 4000 can hold approximately 48 quarts.
How many quarts of fluid does a Allison 1000 take?
Remove 15 mm drain plug on transmission pan and drain old fluid, this should be 7.4 quarts unless you are low on fluid to begin, reinstall drain plug.
What kind of filter does Allison make for GM trucks?
The Allison external spin-on filters are leak-proof and made specifically for certain GM trucks for a perfect fit each time. The Allison external spin-on filters are leak-proof and made specifically for certain GM trucks for a perfect fit each time. .
What kind of transmission filter does a GM Truck need?
The Allison external spin-on filters are leak-proof and made specifically for certain GM trucks for a perfect fit each time. . The Motorcraft transmission filter is a factory original made for a direct fit and easy installation.
What is a transmission filter and how does it work?
The transmission is one of the most important parts of a vehicle. Without it, a vehicle cannot move. Transmission filters work by catching excess fluids and filtering out debris and contaminants before they enter the transmission. Finding the right transmission filter is essential to proper vehicle operation.