How do I setup my DrayTek router as an access point?
Log in to the router’s web interface and browse to [Wireless LAN (2.4GHz)] > [General Setup]. Click OK to apply the settings. Click OK to apply that setting change. Now connect the access point from LAN port A1 to one of the LAN ports on the Vigor 2860n.
How do I find my DrayTek WIFI password?
Enter the default Wi-Fi password printed on the back of the product. Then, you should be connected to the routers’ LAN. To change the password, please log in to your Vigor Router or VigorAP, and change the security settings at Wireless LAN >> Security page.
How do I change my WIFI password on my DrayTek router?
Go to [System Maintenance] > [Admin Setting]. Enter the existing password in the Old Password box, then put the new password in both the New Password and Confirm Password boxes. Click OK to apply the change. The router will then display this message to indicate that the password has changed.
What is DrayTek APS?
The DrayTek VigorAP access points can be managed by the DrayTek VigorACS central management system – a cloud platform which can manage most DrayTek products – routers, wireless access points and Ethernet switches, giving you complete visibility and control of your DrayTek product estate, even without a DrayTek Vigor …
Can I use DrayTek router as access point?
This article will show how to set up a DrayTek wireless Router as a wireless Access Point. This would be in addition to an existing router providing Internet access on the network, which does not need to be a DrayTek router.
How do I enable 2.4 GHz on my router?
Go to Gateway > Connection > Wi-Fi. To change your Channel Selection, select Edit next to the WiFi channel (2.4 or 5 GHz) that you’d like to change, click the radio button for the channel selection field, then select your desired channel number.
What is DrayTek default password?
DrayTek Router Login Guide The default username for your DrayTek router is admin. The default password is admin.
How do I change the SSID on my draytek router?
Connect the AP to the router’s LAN port, and go to Wireless LAN (2.4GHz) >> General Setup to set up SSID:
- Check Enable 2 Subnet (Simulate 2 APs)
- Create two SSID.
- Specify Subnet for each SSID.
- Leave the VLAN ID as zero (untagged).
- Click OK to apply.
What is vigor connect?
VigorConnect is a 24/7 DrayTek VigorAP & VigorSwitch management server, that can automate laborious and repetitive maintenance tasks such as updating firmware and taking configuration backups. Time windows can be specified so that configuration backups run once a week.
What is the Draytek ap-900?
The DrayTek Vigor AP-900 is a wireless access point which can be operated in standalone or centrally managed/monitored mode (with the use of a central DrayTek management product – see later).
How do I find the IP address of the ap-900?
To find out which IP address you need to use to access the device you should check the local DHCP server and match the MAC address of the AP-900 to the IP address listings in its ARP cache table or DHCP table. If you have a DrayTek router handling DHCP then you can check this from the routers Diagnostics menu:
What are the Lan a ports on the ap-900 used for?
The four ports on LAN A are particularly of use if you are using the AP-900 as a wireless bridge as you can then connect wired PCs or devices to it. LAN Port 1 on LAN-A is also used as the PoE input if you’re powering the AP-900 by PoE.
What should I do if my ap-900 is locked out?
In situations like this, especially if you happen to lock yourself out of the device and are unsure what to do, the best option is often just to factory reset the AP-900. It will restore to its original settings and you should be able to access the device for further configuration.