How do you add a miter flange in Solidworks?

How do you add a miter flange in Solidworks?

(Sheet Metal toolbar) or click Insert > Sheet Metal > Miter Flange .

What is a miter flange in Solidworks?

A miter flange feature adds a series of flanges to one or more edges of a sheet metal part. The sketch for a miter flange must adhere to the following requirements: The sketch can contain lines or arcs. If you use an arc to create a miter flange, the arc cannot be tangent to the thickness edge.

How do you edge flange in Solidworks?

Adding Edge Flanges

1. In an open sheet metal part, click Edge Flange. (Sheet Metal toolbar) or Insert > Sheet Metal > Edge Flange.
2. In the graphics area, select one or more edges for Edge . There are specific requirements for adding edge flanges to curved edges.
3. Set options in the Edge-Flange PropertyManager and click .

How do you do a swept flange in Solidworks?

To create swept flanges:

1. Sketch an open, non-intersecting profile on a plane or face.
2. Create a path for the profile to follow. You can use a sketch or a series of existing sheet metal edges.
3. Click Swept Flange.
4. In the graphics area:
5. Set options in the PropertyManager, then click .

What is sketched bend in Solidworks?

To create a sketched bend feature: Sketch a line on a planar face of the sheet metal part. Alternatively, you can select the sketched bend feature before you create a sketch (but after you select a plane).

How do you cut edges in Solidworks?

Click Cut With Surface on the Features toolbar, or click Insert > Cut > With Surface. In the PropertyManager, under Surface Cut Parameters, select the surface or plane to use to cut the solid bodies. Examine the preview. If necessary, click Flip cut to reverse the direction of the cut.

How do you use a swept flange?

How do you make a tapered hole in Solidworks?

1. Click Model > Hole.
2. Click to change the hole type to Standard hole.
3. Click to change the hole profile to Tapered.
4. Select the desired hole chart in the box adjacent to (Thread Type).
5. Type or select a screw size in the box adjacent to .
6. To add a countersink, click .
7. To add a counterbore, click .

How do you change the bend angle in Solidworks?

In the Bend Notes section of the property manager, select the text, and then click on the complementary angle button. This will replace the supplementary angle with the complementary measure for all bend notes in the selected drawing views.

How do you make a tapered hole in SOLIDWORKS?

What is tapered hole?

A tapered hole is one where the start diameter of the hole is a different to the end diameter of the hole.

How do I make NPT holes in SolidWorks?

Utilizing the Hole Wizard Feature Once we open up the Hole Wizard feature, select the Tapered Tap option in the Hole Type section. Set the standard to ANSI Inch, set Type to Tapered Tap Pipe Tap and in the hole specifications, select the desired size in inches.