How do you use the Aztech HomePlug?

How do you use the Aztech HomePlug?

In Location A plug in your HomePlugAV into the wall socket then connect it to your Modem/Router’s Ethernet LAN port using an Ethernet cable. 3. In Location B plug in your HomePlugAV into the wall socket then connect it to your computer’s Ethernet Port using an Ethernet cable. Your HomePlugAV is now ready to use.

How do I connect my HomePlug?

1. Take the HomePlug adapter and plug it into a power socket close to your router and connect to the router via the Ethernet cable provided. 2. Take the other HomePlug adapter and plug it into a power socket close to your games console and connect via the Ethernet cable provided.

How do I reset my Aztech HomePlug AV 200mbps?

  1. Press Simple Connect button for 10 seconds or wait until ALL LED blinks.
  2. To confirm the Private Network Name resets, the Powerline Activity LED will switch OFF.
  3. Plug your HomePlug AVs side by side where you can easily observe the LED behavior.
  4. Press Simple Connect for two seconds on HomePlug X.

How do you pair solwise Homeplugs?

Press Simple Connect for two seconds on HomePlug X. After you release the button, the Power LED will blink. If the Power LED did not blink, press Simple Connect again for two seconds. Pairing between two devices are only given two minutes upon pressing the Simple Connect button for two seconds on HomePlug Y.

How does a HomePlug work?

In a simple home network, the Internet gateway router connects via Ethernet cable to a powerline adapter, which in turn plugs into a nearby power outlet. A second adapter, plugged into any other outlet in the home, connects via Ethernet cable to any Ethernet device (e.g., computer, printer, IP phone, gaming station).

How do I reset my solwise HomePlug?

To perform RESET to factory defaults, press the reset button for 3 SECONDS. Press the Simple Connect button of your HomePlug X for 10 SECONDS. After you release the button, the Power and the Ethernet LED will turn OFF and turn ON. Press the Simple Connect Button of HomePlug AV Y for TWO SECONDS.

How do you set up solwise?

  1. Plug the PLC adapter to AC outlet.
  2. and connect to router or broadband.
  3. modem with an Ethernet cable.
  4. (provided)
  5. Plug the PLC Wi-Fi Extender to AC.
  6. outlet and place it in a location you.
  7. wish to extend Wi-Fi access.
  8. Search Wi-Fi network and connect.

Are HomePlugs faster than Wi-Fi?

While you might be able to maintain a consistent connection, wireless speeds are significantly slower than a wired Ethernet connection. This won’t be too much of an issue for browsing the internet but could pose a problem if you are trying to stream content off a NAS or send large files wirelessly between devices.

What is Wi-Fi HomePlug?

The HomePlug Wireless Access Points allows users to have their wireless network originate from the middle of their home, or from the furthest extremity, with no visible cables. The HomePlug Wireless Access Points can be plugged into any electrical outlet to create an area of wireless access.

How do you set up a solwise HomePlug?

What is Aztech HomePlug?

Embarking on HomePlug technology – a concept of No New Wires® data communications, Aztech HomePlug transforms your in-house powerline into a networking infrastructure. Thus it successfully reduces “”dead spot”” and increases network coverage within your home.

What is Aztech hl105e HomePlug Ethernet adaptor?

The Aztech HL105E Homeplug Ethernet Adaptor provides No New Wires Ò communications to any rooms, over any powerline wires, at the speed of up to 85Mbps. Targeted at the residential users, it is utilizing Intellon INT5500 high-speed powerline chipset and patented PowerPacket OFDM technology.

What does simple connect button do on Aztech hl113eaztech?

The “”Simple Connect”” button doubles as a security feature supported with 128-bit AES Hardware encryption, ensuring the network communications is free from eavesdroppers and hackers. HL113EAztech HL113E joins Aztech’s line of eco-friendly HomePlugs with the lowest power consumption of 2W.

What is the powerline speed of Aztech hl125g?

With fast powerline speed of 500Mbps, Aztech HL125G offers the best performance of its range, enabling gigabit fast streaming of high bandwidth-demand”. No configuration or software is required to pair Aztech HomePlugs.