Table of Contents
How do I make my fireplace blower quieter?
Cleaning a fireplace blower every few years keeps it running quieter and longer. Remove the blower and suck out as much dust as possible with a shop vacuum. Gently brush across the fan blades with an old toothbrush, taking care not to bend the blades. Then vacuum a second time.
Can you lubricate a fan motor?
Doing small maintenance on your appliances can extend the life of them by years. An electric fan is no different. You can make an electric fan last longer if you simply lubricate the motor on a regular basis.
Can I use WD40 on fan motor?
[Never put WD-40 in] any electric motor, even if the rotor is stuck from filthy dried-up lubricant! It not only removes any remaining lube, but it can melt coil wires (the lightly-coated copper wires twisted up in electric motors) and cause an electrical short.
How do you fix a noisy electric fireplace fan?
Depending on your electric fireplace model, you may need to remove a cover or panel to access the blower fan. Dust the blower with a soft cloth, or use a soft brush attachment on a vacuum to remove the dust and dirt from the blower fan. Dust buildup can cause the heater to become excessively noisy.
Why is my fireplace so loud?
Noises produced by a fireplace are caused by leaks in the burner assembly which can be detected and fixed using a water and detergent solution. Another reason could be dust buildups in the blower, in which case, removing the blower and cleaning it will make the gas fireplace quieter. Noisy gas fireplace?
Can I run my gas fireplace without the fan?
Gas fireplaces do not need a blower. Gas fireplaces can be used for hours without a blower as long as the gas fireplace is well vented. This is because a gas fireplace blower is an external unit. It is not an in-built part of the gas fireplace, so the gas fireplace can function without the blower.
How do you clean an electric fireplace vent?
How to Clean an Electric Fireplace
- Turn off the unit.
- Remove or open glass doors.
- Dust your logs, stones, andirons or hearth with a clean cloth.
- Vacuum vents with a hand vacuum or hose attachment.
- Use a duster or damp clean cloth to wipe down the inside and outside of your fireplace walls.
What oil do you use to lubricate a fan?
Use 10- 15- or 20-weight non-detergent motor oil to lubricate your fan. It’s important to avoid detergent, which can gum up the bearings. Don’t rely on penetrating oils, such as 3-in-1 oil. They are fine for loosening stuck screws but aren’t heavy enough to lubricate a fan.
What can I use to lubricate a fan motor?
Lubricate with nondetergent SAE 20 oil. Place 1 to 2 drops in each oil port. Be very careful not to use too much oil or get the oil into the motor.
Can I use cooking oil to lubricate fan?
Cooking oil will “gum up” after a while and the fans will literally stop spinning. Machine oil is better, but even then, it can catch dust and ultimately increase friction. Your best solution is simply to replace the fan, if it is noisy.
Why is my electric fireplace fan so loud?
Whirring Sound – Blower Fan As the fan inducts air through the vents of your electric fireplace, dust can also be transported inside. If you’re fan or motor becomes contaminated with dirt, dust, and/or debris, it can cause a whirring noise from your electric fireplace.
Why is my fireplace making noise?
Over time, dirt, dust, or any other object that obstructs any part of the fireplace can trigger annoying noises. They can also eventually impact the fireplace’s function. Noises occur because the high-pressure flow of the gas through the tubing is disrupted.
Is it normal for fireplace to make noise?
A rumbling noise that occurs when the burners are on typically means that burners are dirty. Contact our chimney professionals to have your burners properly cleaned. If there is a roaring sound that occurs when the pilot light is on, it is usually because the flame needs to be adjusted.
What is the purpose of the fan on a fireplace?
A fireplace fan blower uses a space behind the fireplace to heat up air before it’s blown out into the room. This conductive heat transfer uses new air pulled in through vents, not air from your fire. This means the draft of your fireplace unit is not affected at all.
What kind of oil do you put in an electric fan?
If you have an electric fan that has parts that are prone to corrosion, exposure to water, or other issues, then you might not want to work with your regular SAE. This is a special sprayable oil that helps waterproof your fan’s motor and also sprays on clean.
How do I lubricate the motor Grill on my fan?
Remove the motor grill by first removing the screws that hold it in place. Lubricate with nondetergent SAE 20 oil. Place 1 to 2 drops in each oil port. Be very careful not to use too much oil or get the oil into the motor. Spray the shaft with a lightweight lubricant. Reassemble the fan and test.
Do electric fan motors need lubricants?
The good news is that many high-functioning electric motor lubricants will work well with the fans you have. Each motor will have its own needs, but thankfully, there are a bunch of ways to make sure that you get your electric fan motor in working order.
Why should you use 3-in-1 oil for your electric fan?
This time around, 3-in-1 offers up a heat-resistant oil that extends machinery life, keeps things running smoothly, and comes with an easy squeeze bottle ideal for small appliances. If you have an electric fan that has parts that are prone to corrosion, exposure to water, or other issues, then you might not want to work with your regular SAE.