How do you rotate a smart dimension in Solidworks?

How do you rotate a smart dimension in Solidworks?

To rotate Dimension text:

1. Type RotateDimensionText at the command prompt.
2. Specify the angle to rotate the Dimension text.
3. In the graphics area, select Dimensions, and press Enter. The text of specified Dimensions rotates about the specified angle.

How do I change dimension position in Solidworks?

Dimension Leaders/Text

1. Click Options. on the Standard toolbar, or click Tools > Options.
2. On the Document Properties tab, expand Dimensions.
3. Click a dimension type, for example, Angle.
4. In Text position, select a position, for example, Broken Leader, Horizontal Text .
5. Click OK.

How do you use ordinate Dimensions?

Ordinate Dimensioning: Ordinate dimensioning is used when the X and the Y coordinates, from one location, are the only dimensions necessary. Usually the part has a uniform thickness, such as a flat plate with holes drilled into it. The dimensions to each feature, such as a hole, originate from one datum location.

What is ordinate dimension?

Ordinate dimensions are a set of dimensions measured from a zero ordinate in a drawing or sketch. In drawings, they are reference dimensions and you cannot change their values or use the values to drive the model. Ordinate dimensions are measured from the axis you select first.

How do you bend a dimension line in Solidworks?

Right-click a dimension extension line and select Display Options > Jog. Horizontally or vertically drag a point on the dimension extension line to create a bend.

How do I create a angular dimension in Solidworks?

To create an angular dimension between two lines:

1. In an open sketch, click Smart Dimension. (Dimensions/Relations toolbar) or Tools > Dimensions > Smart.
2. Click one line.
3. Click the second line.
4. Move the pointer to show the angular dimension preview.
5. Set the value in the Modify box and click .
6. Click to place the dimension.

How do you use ordinate dimensions?

When placing a linear dimension How do you change the dimension orientation?

You can change the orientation of a linear dimension created using point references. You can change the orientation to horizontal, vertical, slanted, parallel, or perpendicular to, using the Orientation option on the Dimension ribbon tab.

What is horizontal dimension?

The horizontal dimension identifies the nature of that distinctiveness. It is represented in the Linnean taxonomy that assigns DEBATE Page 4 persons, or other living things, to appropriate taxa.

How do you use ordinate dimension?

To Create an Ordinate Dimension

1. Move the UCS origin to the datum.
2. Click Annotate tab Dimensions panel Dimension. Find.
3. At the prompt, enter o (Ordinate).
4. If you do not want jogs in the ordinate leaders, turn on Ortho mode [F8].
5. Specify a point for the feature location.
6. Specify a leader endpoint.

How do I create a horizontal dimension in Solidworks?

Creating Horizontal Dimensions

1. In an open sketch, click Horizontal Dimension. (Dimensions/Relations toolbar) or Tools > Dimensions > Horizontal.
2. Select the two entities to dimension. You can undo previous selections by pressing Esc.
3. Set the value in the Modify box and click .
4. Click a location to place the dimension.

What is an angular dimension?

Angular dimensions measure the angle between two non-parallel lines, the angle subtended by an arc, or the angle formed by three selected points. In addition, you can control the layer on which the dimension is created.

When placing a linear dimension How do you change the dimension orientation from horizontal to vertical and vice versa in Revit?

You can change the orientation to horizontal, vertical, slanted, parallel, or perpendicular to, using the Orientation option on the Dimension ribbon tab. You can change the orientation of only driven and reference dimensions created using point references.

What command is use to create a horizontal and vertical dimension?

Using the “Linear” dimension command, you can create and place a horizontal, vertical or rotated dimension line.

How to use ordinate dimension in Revit?

Click Ordinate Dimension on the Dimensions/Relations toolbar, or click Tools > Dimensions > Ordinate. You can select Horizontal Ordinate Dimension or Vertical Ordinate Dimension to specify the direction of the dimensions.

What are ordinate dimensions in SolidWorks?

SOLIDWORKS Help. Ordinate dimensions are a set of dimensions measured from a zero ordinate in a drawing or sketch. In drawings, they are reference dimensions and you cannot change their values or use the values to drive the model. Ordinate dimensions are measured from the axis you select first.

Can You dimension to midpoints in AutoCAD?

You can dimension to edges, vertices, and arcs (centers and minimum and maximum points). You can also dimension to midpoints when you add ordinate dimensions. Ordinate dimensions are automatically grouped to maintain alignment. When you drag any member of the group, all the members move together.

How do I modify ordinate dimensions?

You can modify ordinate dimensions using commands on the shortcut menu. Aligns all the dimensions along the ordinate with the 0.0 ordinate. Bends the leader line of a dimension and allows you to reposition the dimension. Applies the automatic jogging algorithm to the ordinate dimensions. Adds parentheses around the selected dimensions.