How do I open ports on my UBEE router?

How do I open ports on my UBEE router?

To port forward your Ubee router, follow the steps below:

1. Log in to your router.
2. Navigate to the port forwarding section.
3. Create a port forward entry.
4. If you are forwarding a single port, enter this number into the Local Start and End Port boxes and the External Start and End Port boxes.

How do I setup my UBEE modem?

To access the Ubee admin portal in a web browser, go to 192.168….On the top menu, click the Wireless tab, then complete the following steps.

1. On the left-hand menu, click Radio.
2. From the Wireless Interfaces drop-down menu, select a WiFi network name.
3. Click Apply.

How do I bridge my UBEE modem?

To set up the modem to router mode;

1. Go to Gateway.
2. Click on WAN.
3. In the Operation Mode section select Bridge mode (Bridges entire device. No Routing, No NAT, No DHCP, No Firewall)
4. Click Apply.

How do I reset my UBEE modem?

To factory reset your Ubee modem:

1. Find the reset button on the back of the modem.
2. Use a paperclip or something similar that’s pointy and non-metallic to press and hold the reset button.
3. Keep this button held for about 15 seconds for the reset process to begin.
4. The modem will restart and finish its reset process.

How do I enable UPnP on my UBEE router?

Under the Equipment section, select Router. Scroll down and select Advanced Settings. Select UPnP. Use the toggle button to enable or disable UPnP.

What lights should be on Ubee modem?

Troubleshooting

How do I open ports on my router spectrum?

About This Article

1. Open the My Spectrum app and tap Services.
2. Tap Router below “Equipment.
3. Tap Advanced Settings.
4. Tap Port Forwarding & IP Reservations.
5. Tap Add Port Assignment.
6. Enter the name for the port assignment.
7. Enter the internal and external port numbers.
8. Select the port protocol.

How do I update my Ubee router firmware?

How to load new firmware onto your router

1. Step 1: Log in to your router.
2. Step 2: Determine the router’s firmware version.
3. Step 3: Determine the latest available firmware version.
4. Step 4: Download the latest firmware.
5. Step 5: Upload the new firmware to your router.
6. Step 6: Wait for the magic to happen.