Table of Contents
What engine does a 325i E90 have?
N52B25 straight-6 N.A.
Gasoline
| Model | Years | Engine |
|---|---|---|
| 323i | 09/2007–10/2010 | N52B25 straight-6 N.A. |
| 325i | 01/2005–08/2007 | N52B25 straight-6 N.A. |
| 09/2007–06/2012 | N53B30 straight-6 N.A. | |
| 328i | 09/2007–10/2011 |
What engines is in 325i?
BMW 325i uses the M50 engine that was produced between 1990 and 1996. These were straight-6 DOHC petrol engines that replaced the earlier M20 type. In 1992, there was a technical upgrade of the M50. The new M50 TU engines used variable valve timing by adjusting the phasing of the intake camshaft.
What engine does the E90 have?
E90 represents the sedan while E92 is the coupe. They both use the same BMW N52 engine, so the engine specs will remain the same. However, the E90 and E92 designation means the cars actually lie upon different chassis. Specs such as 328i weight, length, ground clearance, etc do vary depending on coupe vs sedan.
Is E90 325i reliable?
Although the BMW E90 325i and 328i are some of the most reliable BMWs, they’re not fault-proof. Like every other BMW engine made after 1990, the N52 came with VANOS. Essentially, this was BMW’s V-TEC equivalent, which modulated the engine’s valves for better fuel efficiency or more power.
What kind of engine does a BMW E90 3 series 325i have?
The BMW E90 3 Series 325i has a Inline 6, Petrol engine with 2497 cm3 / 152.4 cu-in capacity. How many horsepower (hp) does a 2005 BMW E90 3 Series 325i have? The 2005 BMW E90 3 Series 325i has 218 PS / 215 bhp / 160 kW.
What is the engine capacity of BMW E90?
It forms part of BMW’s E90 series. It’s powered courtesy of a naturally aspirated engine of 3 litre capacity. This unit features double overhead camshaft valve gear, 6 cylinder layout, and 4 valves per cylinder. It develops 215 bhp (218 PS/160 kW) of power at 6100 rpm, and maximum torque of 270 N·m (199 lb·ft/27.5 kgm) at 2400-4200 rpm.
What is the power of a BMW 325i?
The BMW 325i’s engine is a naturally aspirated petrol, 3 litre, double overhead camshaft 6 cylinder with 4 valves per cylinder. This powerplant has an output of 208 bhp (211 PS/155 kW) of power at 6100 rpm, and maximum torque of 270 N·m (199 lb·ft/27.5 kgm) at 2400 rpm.
What are the specs of a 3 series 325i?
BMW E90 3 Series 325i Specs BMW E90 3 Series 325i Size, Dimensions, BMW E90 3 Series 325i Size, Dimensions, Body : Sedan Num. of Doors : 4 Wheelbase : 276 cm or 108.66 inches Length : 452 cm or 177.95 inches