Table of Contents
Do you need a special faucet for granite countertops?
Many faucets for granite have pull-down sprayers that allow the spray heads to effortlessly reach where you need them. Faucets featuring ceramic disc valves will ensure drip-free performance. These valves are maintenance free and provide smooth handle control, even in extreme temperatures or hard-water conditions.
How far should faucet hole be from sink?
2¼ to 2½ inches
Since faucet holes are generally cored 2¼ to 2½ inches from the inside edge of the sink the water stream from a faucet with a wide reach will likely fall in front of the drain rather than in the center which might result in water splashing out of shallow bowls like those of a prep sink.
Do undermount sinks need special faucets?
Undermount sinks are mounted on top of the sink cabinet using caulking and clips. For a clean, modern look, the result is a smooth, no-lip installation. No special size is needed for the sink to work with existing countertops and faucets.
Should faucet be over drain?
EXPERT TIP. The end of the faucet should be a few inches above the rim of the sink, or there will be splashing. The angle that the water hits the sink also has an effect on splashing. Aim for the water to hit the bottom of the sink, in the centre over the drain.
How far back should a faucet be from undermount sink?
Undermount and Faucet Sizing That leaves an inch of space in front of the sink and 3 inches behind the sink for the faucet.
How far should the faucet be from the backsplash?
In this case there should be about 3 inches of space from the edge of the sink to the wall/backsplash. In most cases this will allow at least a one inch rim around the front of the sink. Again, this measurement will depend on the size of your sink as well as your countertop depth.
Should I use plumbers putty when installing a faucet?
If you’re installing a faucet, it may be necessary, but you also might not need it. The reason being is that some faucets come with a rubber or plastic gasket or trim ring near the faucet deck plate that fits over the faucet holes in the sink. In that case, plumber’s putty isn’t completely necessary but doesn’t hurt.
Do you put silicone under faucet?
Mount the Faucet With Silicone Most new faucets include a gasket of some type to create a seal between the faucet and the sink, but it’s still a good idea to apply a bead of clear silicone caulk to the bottom of the faucet and the bottom of the gasket to ensure a good seal.
Do you need a special faucet for an undermount sink?
Do undermount sinks need faucet holes?
Unlike other sink types, where the rim of the fixture includes pre-drilled faucet holes, there is no accessible rim on an undermount sink, which means you have to drill holes for the faucet in the countertop.
Can you screw into granite?
Yes, you can drive screws into granite countertops. Because of the material’s attractiveness and durability, granite countertops and flooring are popular among homebuilders and homeowners. Granite comes in a range of designs, colors, and finishes.